|
Tyco Electronics |
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
www.circuitprotection.com
Metal Oxide Varistors
Overvoltage Protection Device
Raychem Circuit Protection Products
PRODUCT: ROV1w0w, wR.DOatVaS1h0eeHt4U.com
10mm Series
DOCUMENT: SCD 25482
PCN:
REV LETTER: D
REV DATE: JULY 19, 2007
PAGE NO.: 1 of 10
GENERAL DESCRIPTION
The ROV10-XXX (Radial-leaded Metal Oxide Varistor)
products are 10mm radial leaded varistor devices
suitable for protection of overvoltage transients.
ROV devices can provide protection for a wide variety
of power systems against overvoltage faults such as
lightning, power contact and power induction. Suitable
for a broad range of applications including, but not
limited to security, power supplies, surge strips, etc.,
the ROV device helps to protect valuable equipment
from potential power surge damage by clamping high
energy, short duration impulses. The ROV devices
have high current handling and energy absorption
capability and fast response times to help protect
against transient faults.
FEATURES
• Radial leaded
• Broad Varistor voltage and Vrms range
Varistor voltage : 18V - 1800V
Vrms voltage : 11V - 1000V
• Two surge capability series
Standard series, High surge series
• Various lead types
Straight, Kinked, Other
• Various packaging options
Bulk, Tape & Reel, Ammo Pack
• Helps designers meet the following standards
UL, CSA, VDE
• Fast response time
• High current and energy absorption capability
APPLICATIONS
• Power supplies and power systems
• Line voltage
• Telecommunications systems
• Automotive systems
• Appliances
TYPICAL APPLICATION SCHEMATIC
*
Protected
device
*In some applications, a polymeric PTC device such as a Tyco Electronics PolySwitch device may be used instead of a
fuse to provide a preferred solution.
MATERIALS INFORMATION
RoHS Compliant
ELV Compliant
*After May 1, 2005 all ROV devices will be produced as RoHS compliant devices.
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
www.circuitprotection.com
Metal Oxide Varistors
Overvoltage Protection Device
Raychem Circuit Protection Products
PRODUCT: ROV1w0w, wR.DOatVaS1h0eeHt4U.com
10mm Series
DOCUMENT: SCD 25482
PCN:
REV LETTER: D
REV DATE: JULY 19, 2007
PAGE NO.: 2 of 10
PART NUMBERING
Manufacturer series
Disk Diameter
10mm
ROV 10 – 241 K -S -2
Packaging
: Bulk
-2 : Tape & Reel
-AP : Ammo Pack
Surge series
- : Standard Series
H : High Surge Series
Lead Type
: Kinked Lead
-S : Straight Lead
Varistor Voltage
241 = 24 x 10^1 = 240V
Manufacturer’s Mark
Voltage Designator
471 K Tolerance (± 10%)
- Lot Identification
- Agency Marking
Tolerance
K : ±10%
L : ±15%
M : ±20%
471K
VDE
Lot Identification
RoHS compliant devices: 4 characters
Non RoHS compliant devices: 5 characters with M at the end.
GENERAL CHARACTERISTICS
Storage temperature:
Maximum operating temperature:
Maximum working surface temperature:
Temperature coefficient of voltage:
Insulation resistance of coating (@ 500 VDC):
Maximum response time:
Lead Material:
-40°C … +125°C
-40°C … + 85°C
+115°C
0 … +0.05% / °C max.
Over 1000MΩ
25ns
22 AWG Sn Plated Copper
AGENCY RECOGNITION
Device Ratings and Characteristics Tables contain specific recognition information for each individual part. The table below details
marking symbols for each agency recognition type.
UL1414
UL1449
(2nd Edition)
CSA
VDE
|