XPM-4100WG 반도체 회로 부품 판매점
8.5Gb/s 850 nm XFP Multi-Mode Optical Transceiver
|
|
 Optoway Technology |
Optoway
1
XPM-4100WG
***********************************************************************************************************************************************************************
XPM-4100WG / XPM-4100BWG / XPM-4100AWG
(RoHS Compliant)
8.5Gb/s 850 nm XFP Multi-Mode Optical Transceiver for 8G FC Applications
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 8.5 Gb/s Bi-directional Data Link
l Complaint to XFP MSA
l Compliant with 8G FC 800-M5/M6/M5E-LC-I
l Multirate for 8G / 4G / 2G FC
l Link Distance at 8.5 Gbd
XPM-4100WG series multi-rate 8G XFP transceiver is
designed for serial optical data communications such as 8G
Fiber Channel. It supports the 8.5Gbps transmission on both
50/125 µm and 62.5/125 µm MMF.
The transceiver consists of two sections: The transmitter
150 m links with OM3 MMF Cables
section consists of a directly modulated 850 nm VCSEL,
50 m links with OM2 MMF Cables
driver and signal conditioner. The receiver section
21 m links with OM1 MMF Cables
l 850 nm VCSEL Transmitter
l 2-Wire Interface for Integrated Digital Diagnostic
incorporates a PIN photodiode integrated with a
trans-impedance preamplifier (TIA) and signal conditioner.
The module is with the XFP 30-pin connector to allow
Monitoring
l XFI Loopback Mode
l No reference clock required
l Low Power Dissipation < 1.2W
l Only Required +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operating: XPM-4100WG
l -10 to 85oC Operating: XPM-4100BWG
l -40 to 85oC Operating: XPM-4100AWG
l Duplex LC Connector
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Only single 3.3V power supply is needed. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
A serial EEPROM in the transceiver allows the user to
APPLICATIONS
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
l Multi-rate 8x/4x/2x Fiber Channel
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
STANDARD
l Compliant with XFP MSA
l Compliant with 8G FC
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
LASER SAFETY
This transceiver is a Class 1 laser product. It complies with
IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The
transceiver must be operated within the specified
temperature and voltage limits. The optical ports of the
module shall be terminated with an optical connector or with
a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
XPM-4100WG
XPM-4100BWG
XPM-4100AWG
*LINK LENGTH
8 /4 /2
8 /4 /2
8 /4 /2
Distance
(m)
150/50/21*
150/50/21*
150/50/21*
Wavelength
(nm)
850
850
850
Package
XFP with DMI
XFP with DMI
XFP with DMI
Connector
LC
LC
LC
Temp
(oC)
0 to 70
-10 to 85
-40 to 85
RoHS
Compliant
Yes
Yes
Yes
Data Rate / Standard
8.5 GBd
www.DataSheet4U.com
Fiber Type
62.5/125 µm MMF (OM1)
50 / 125 µm MMF (OM2)
50 / 125 µm MMF
50 / 125 µm MMF
50 / 125 µm MMF (OM3)
Model Bandwidth @ 850nm (MHz-km)
200
500
900
1500
2000
Distance Range (m)
0.5 to 21
0.5 to 50
0.5 to 90
0.5 to 120
0.5 to 150
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2009/11/1 V3.0
Optoway
2
XPM-4100WG
***********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg -40 85 oC
0 70 oC XPM-4100WG
Operating Case Temperature
Topr
-10
85
oC XPM-4100BWG
-40 85 oC XPM-4100AWG
Relative Humidity
RH 0
85 % Non condensing
Power Supply Voltage
Input Voltage
VCC3
---
0
GND
3.6
Vcc3
V
V
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
VCC3
3.13
3.3
3.47
Power Supply Current (@3.3V)
ICC3
240 400
Power Dissipation
PD
1.2
0 70
Operating Case Temperature
Topr
-10
85
-40 85
Data Rate
8.5
Units / Notes
V
mA
W
oC / XPM-4100WG
oC / XPM-4100BWG
oC / XPM-4100AWG
Gb/s
Transmitter Optical Specifications (Topr= 0 to 70oC, Vcc3 = 3.3V ±5%)
Parameter
Symbol Min Typ Max
Average Launch Power
Launch Power in OMA
Output Center Wavelength
Output Spectrum Width
Relative Intensity Noise
Po, Avg
-8.2 -3.3
-1
Po, OMA
302
λc
840 850
860
σλ 0.60
RIN -128
Average Launch Power of OFF
Transmitter
-30
1. Output power is power coupled into a 50/125 µm MMF.
Receiver Optical Specifications (Topr= 0 to 70oC, Vcc3 = 3.3V ±5%)
Parameter
Symbol Min Typ Max
Unstressed Sensitivity at 8.5 Gb/s
Sen
0.076
-12.5
Stress Sensitivity at 8.5 Gb/s
Sens
--- 0.155
Receiver Overload
LOS -- Deasserted
LOS -- Asserted
LOS -- Hysteresis
PMAX
0.5 ---
LOSD --- --- -15
LOSA -25 --- ---
1 ---
Wavelength of Operation
λc 840
860
Optical Return Loss
ORL
-12
1. Measured with worst ER; BER=1E-12 and PRBS 27-1s.
Units
dBm
µW
nm
nm
dB/Hz
dBm
Notes
1
1
RMS (σ)
Units
mWp-p
dBm
mWp-p
dBm
dBm
dBm
dB
nm
dB
Notes
2, OMA
3, Average Power
2, OMA
Transition: low to high
Transition: high to low
www.DataSheet4U.com
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2009/11/1 V3.0
|
PDF 파일 내의 페이지 : 총 9 페이지
제조업체: Optoway Technology
( optoway )
XPM-4100WG transceiver
데이터시트 다운로드 :
[ XPM-4100WG.PDF ]
[ XPM-4100WG 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
