|
TAOS |
t TRS1722, TRS1755, TRS1766
HIGH SENSITIVITY REFLECTIVE COLOR SENSOR
t WITH LIGHTĆTOĆVOLTAGE CONVERTERS
TAOS034 – NOVEMBER 2002
D Converts Reflected Light Intensity to
Output Voltage
D Integral Color LEDs and Matching Color
Filters on Sensors
D Sensor is a Monolithic Silicon IC
Containing a Photodiode, Operational
Amplifier, Feedback Components, and
Color Filter
D High-Output LEDs and High-Sensitivity
Sensors
D Single Voltage Supply Operation
D Surface-Mount Package
ANODE 1
GND 2
PACKAGE
(TOP VIEW)
4 OUT
3 VDD
Description
The TRS1722, TRS1755, and TRS1766 are high-sensitivity reflective color sensors in red (630 nm), green
(567 nm), and blue (470 nm) — respectively — with light-to-voltage converters. Each device consists of a
colored LED light source, a photodiode light sensor with matching optical color filter, a transimpedance amplifier,
and on-board signal conditioning. Output voltage is directly proportional to the reflected light intensity on the
photodiode plus any ambient light (which may be considered noise).
Functional Block Diagram
LED
Anode
External
ÇÇÇÇÇÇÇÇReflecting
Surface
–
+
Voltage
Output
The LUMENOLOGYr Company
t
Texas Advanced Optoelectronic Solutions Inc.
800 Jupiter Road, Suite 205 S Plano, TX 75074 S (972t) 673-0759
www.taosinc.com
Copyright E 2002, TAOS Inc.
1
TRS1722, TRS1755, TRS1766
HIGH SENSITIVITY REFLECTIVE COLOR SENSOR
WITH LIGHTĆTOĆVOLTAGE CONVERTERS
TAOS034 – NOVEMBER 2002
Terminal Functions
TERMINAL
NAME NO.
GND
2
ANODE
1
OUT
4
VDD
3
DESCRIPTION
Ground. LED cathode and sensor ground. All voltages are referenced to GND.
LED anode drive input
Output voltage
Supply voltage
Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
Duration of short-circuit current at (or below) 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 s
LED DC forward current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
LED peak forward current (5% duty cycle @ 1 kHz or more) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
LED junction temperature, LED TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125°C
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –25°C to 85°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –25°C to 85°C
Lead temperature in solder contact zone for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltages are with respect to GND.
Recommended Operating Conditions
Supply voltage, VDD
LED forward current
Operating free-air temperature, TA
MIN MAX UNIT
3 5.5 V
0 10 mA
0 70 °C
LED
PARAMETER
Vf Forward voltage
Ir Reverse leakage
Po Radiant flux
λ Wavelength
BW Bandwidth
TEST CONDITIONS
If = 20 mA
Vr = 5 V
If = 5 mA
If = 5 mA
If = 5 mA
TRS1722
MIN TYP MAX
2.2 3
10
14
630
40
TRS1755
MIN TYP MAX
2.3 3
10
5
567
26
TRS1766
MIN TYP MAX
2.7 4
10
300
468
26
UNIT
V
µA
µW
nm
nm
Copyright E 2002, TAOS Inc.
2
t
www.taosinc.com
The LUMENOLOGYr Company
t
|