|
American Zettler |
AZ733WC
DPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• 1.5 mm contact gap
• Epoxy sealed version available
• Isolation spacing greater than 8 mm
• UL Class B insulation system, class F available
• UL, CUR file E44211
• TÜV file R50311225
CONTACTS
Arrangement DPDT (2 Form C)
Ratings
Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 150 VDC* or 400 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
Silver Cadmium oxide contacts:
TV-3, 125 VAC, 25K cycles, NO Side Only
10A, 250 VAC, 100K cycles, General Use
10A, 30 VDC, 50K cycles NO/NC contacts, Res
TÜV
Material
Silver Tin oxide contacts:
12 A, 277 VAC / 250 VAC, Resistive, 70°C, 8K cycles
1/3 HP 125 VAC, 40°C, 1K cycles
3/4 HP 250 VAC, 40°C, 1K cycles
10 A at 30 VDC, 250 VAC resistive
Silver cadmium oxide; Silver Tin oxide;
Gold Plate optional
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
.8 mW
2.3 W at 20°C (68°F) ambient
1.9 W at 40°C (104°F) ambient
51°C (65°F) at nominal coil voltage
Max. 130°C (266°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 105
1 x 105 at 10 A 240 VAC Res.
Operate Time (typical) 10 ms at nominal coil voltage
7 ms at 1.5 x nominal coil voltage
4.5 ms at 2.0 x nominal coil voltage
Release Time (typical) 4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms contact to coil
(at sea level for 1 min.) 3000 Vrms between open contacts
3000 Vrms between contact sets
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature at nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F)
Storage
-40°C (-40°F) to 130°C (266°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
18 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/20/15
AZ733WC
RELAY ORDERING DATA
COIL SPECIFICATIONS
ORDER NUMBER
Nominal Coil
VDC
3
Must Operate*
VDC
3
Max. Continuous
VDC
5.0
Coil
Resistance
11.3 ±10%
Unsealed
AZ733WC–2C–3D
Sealed
AZ733WC–2C–3DE
55
8.4
31 ±10%
AZ733WC–2C–5D
AZ733WC–2C–5DE
6
6
10.1
45 ±10%
AZ733WC–2C–6D
AZ733WC–2C–6DE
99
12 12
15.5
101 ±10%
AZ733WC–2C–9D
AZ733WC–2C–9DE
20.3
180 ±10%
AZ733WC–2C–12D
AZ733WC–2C–12DE
18 18
24 24
31.2
405 ±10%
AZ733WC–2C–18D
AZ733WC–2C–18DE
40.6
720 ±15%
AZ733WC–2C–24D
AZ733WC–2C–24DE
48 48
79.1
2,880 ±15%
AZ733WC–2C–48D
AZ733WC–2C–48DE
60
60
102.0
4,500 ±15%
AZ733WC–2C–60D
AZ733WC–2C–60DE
*Due to the special construction of this relay, the “Must Operate” voltage is the same as the “Nominal Coil” voltage. It is recommended that the relay be
energized with at least 1.5 X coil nominal and then return the operating voltage to coil nominal; Add 'E' after 2C for Silver Tin Oxide contacts; add 'A'
suffix for gold plate; add 'F' suffix for class F.
MECHANICAL DATA
1.14
(29)
.51
(13)
PC BOARD LAYOUT
Terminal No. Dimensions Tol.: ± 0.005 (0.13)
1,2,4,5,7,8 0.018 (0.457) x 0.038 (0.965)
3,6 0.011 (0.279) x 0.038 (0.965)
WIRING DIAGRAM
Form C
1 23
4
8 76
5
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
.08
(2.1)
.197 .197
.590 (5) (5)
(15)
.295 (7.5)
.05 DIA. (1.3)
Viewed toward terminals
5/20/15
|