|
AXElite |
AX9300
High Power Factor and Accuracy
Constant Current LED Driver
GENERAL DESCRIPTION
The AX9300 is a highly-integrated, low startup current, average current mode, one
cycle control PFC and fixed switching frequency PWM controller. These functions enable
the LED driver to easily meet the accuracy average LED current and high power factor
requirements. The integrated functions also include the LED short protection, open
protection, and internal over temperature protection. The COMP pin controls the duty by
connected an RC compensation network to ground and forming the closed loop feedback
control. To protect the external power MOSFET from being damaged by supply over
voltage, the AX9300 OUT pin voltage is clamped to about 15V.
The AX9300 improves the performance and reduces the cost of the LED driver. It is
a 6-pin SOT-26 package.
FEATURES
- High Power Factor by One Cycle Control
- Accuracy Constant Current
- Low BOM Cost
- Linear Dimming on DIM Pin
- Average Current / Fixed Frequency Control
- Gate Output Voltage Clamp
- LED Open Protection (OVP)
- LED Short Protection (SCP)
- Over Current Protection (OCP)
- Internal OTP Protection
- 300mA Driving Capability for OUT Pin
APPLICATION
- E26/27, T5/T8 LED Lamp
- Others LED Lighting Applications
1/13
Axelite Confidential Materials, do not copy or distribute without written consent.
Rev.1.0 May.11, 2012
AX9300
BLOCK DIAGRAM
VCC
CS
COMP
DIM
15V/8V
UVLO
VCCOVP
+ 40us
28V -
debounce
Over -temperature
protection
OTP
0.8V
OCP
+
-
Internal Bias & Vref
All Blocks
VCC OK
Vref OK
EN
Protection
V-V
Current
Waveform
modulation
VREF
+
-
Dimming
Function
+
-
OSC
RQ
R
S
Driver
stage
OUT
GND
2/13
Axelite Confidential Materials, do not copy or distribute without written consent.
Rev.1.0 May.11, 2012
|