|
AVAGO TECHNOLOGIES |
Solid State Lighting
Mid- and High-Power LEDs, LED-Modules and Color Management
Your Imagination, Our Innovation
Sense • Illuminate • Connect
Free Datasheet http://www.datasheetlist.com/
Solid-State Lighting
Mid- and High-Power LEDs
0.5 Watt Mid-Power PLCC-4 Surface Mount LEDs
0.5 Watt PLCC-4
0.5 Watt Cool White PLCC-4
0.5 Watt Warm White PLCC-4
Description
The superior design of this high-reliability LED package is based on the industry standard
PLCC-4 platform (3.2x2.8x1.9mm) and enables a higher drive current of 150mA. Higher drive
current is possible due to the enhanced heat dissipation capability which also allows you to
operate the LED at up to +110°C ambient temperature. The package is highly reliable and
has a long lifetime with minimum degradation due to enhanced silicone resin material and
the very low thermal resistance of only 60K/W (junction-to-pin). On the white colors, Avago
introduced a new, tighter color binning to cater to the demands of lighting customers. The
high light output at a wide viewing angle (120 degree) provides a good light mixing even
at a short distance from the package. All this makes it an ideal light source for decorative
and general illumination applications, channel or counter lighting as well as advertisement
panel backlighting.
The small size of the PLCC-4 platform package enables higher packaging density over a
given area compared to other half-Watt solutions available on the market. This, for example,
helps to significantly increase the resolution of a screen in a signage application.
Typical Applications
• Decorative and mood lighting
• Channel and counter lighting
• Advertisement panel backlighting
• Battery powered reading lamps and flashlights
• Interior automotive: Dome, map, and reading
lamps, glove compartment illumination
• Exterior automotive: Tail lights and side repeater
• Display backlighting
• Signage
Features
• 0.5 Watt mid-power enhanced PLCC-4 package
• Thermal Resistance: 60 K/W
• High junction temperature: 125 °C
• Robust operating temperature: -40 to +110 °C
• Compatible with IR and TTW soldering processes
• Super wide viewing angle: 120°
• JEDEC moisture sensitivity level (MSL) 2a
(4 weeks of floor life)
• AEC-Q101 qualified
• Available Colors: cool white, warm white, blue,
green, amber, red-orange, red
Color
Wavelength / CCT
Part Number
Min. Flux (Im) Typ. Flux (Im) Max. Flux (Im)
Cool White
4500K – 10000K
ASMT-QWBE-NFH0E 15.0
19.5
33.0
Warm White 2700K – 4700K
ASMT-QYBE-NEG0E 11.5
18.0
25.5
Amber
583nm – 598nm
ASMT-QAB2-FDE0E 9.0
11.4
15.0
Red Orange
611nm – 625nm
ASMT-QHB2-FEF0E 11.5
14.0
19.5
Red
620nm – 635nm
ASMT-QRB2-FCD0E 7.0
9.8
11.5
Blue
460nm – 480nm
ASMT-QBBE-N0B0E 3.4
4.8
7.0
Green
515nm – 535nm
ASMT-QGBE-NEG0E 11.5
17.0
25.5
Notes: 1. ΦV is the total luminous flux output as measured with an integrating shere at mono pulse conditions.
2. Tolerance = ± 12 %
Test Current (mA) Die Technology
150 InGaN
150 InGaN
150 AlInGaP
150 AlInGaP
150 AlInGaP
150 InGaN
150 InGaN
2
Free Datasheet http://www.datasheetlist.com/
|