|
Coilcraft |
Document 295 -1
SMTPowerInductors-DO3314
• Only 3.3 mm square, 1.4 mm high!
• Handles current up to 1.7 Amps rms
Designer’s Kit C358 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 45.9 – 50.2 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part number1
L2 DCR3 SRF4
±20% max typ Isat5 Irms6
(µH) (Ohms) (MHz) (A) (A)
DO3314-102ML_
DO3314-152ML_
DO3314-222ML_
DO3314-332ML_
DO3314-472ML_
1.0 0.11 160 2.10 1.70
1.5 0.14 140 2.00 1.40
2.2 0.20 90 1.60 1.30
3.3 0.26 80 1.40 1.20
4.7 0.32 60 1.20 1.10
DO3314-682ML_ 6.8 0.44
DO3314-822ML_ 8.2 0.47
DO3314-103ML_ 10 0.52
DO3314-153ML_ 15 0.86
DO3314-223ML_ 22 1.20
45 0.92 0.80
45 0.90 0.75
40 0.80 0.75
30 0.68 0.65
20 0.56 0.50
DO3314-333ML_ 33 1.62 15 0.51 0.40
1. When ordering, please specify termination and packaging codes:
DO3314-333MLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (3500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4191A or equivalent.
5. DC current at which the inductance drops 10% (typ) from its value
without current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 295-1 Revised 10/08/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 295-2
SMT Power Inductors - DO3314 Series
Typical L vs Frequency
Typical L vs Current
100 100
33 µH
10 µH
10
3.3 µH
10
1 1 µH
1
33 µH
10.0 µH
3.3 µH
1.0 µH
0.1
0.01
0.1 1
Frequency (MHz)
0.1
10 0.01
0.1 1
Current (A)
10
Irms Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40
-20
0 20 40 60 80 100 120 140
Ambient temperature (°C)
Internal code
0.130 ±0.008
3,3 ±0,2
Dash number
0.130 ±0.008
3,3 ±0,2
0.055
1,4
max
Recommended
Land Pattern
0.024
0,61 0.049
1,24
0.025
0,64
0.148
3,76
0.040 ±0.005
1,02 ±0,127
Dimensions
are
in
inches
mm
0.050
1,27
0.148
3,76
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 295-2 Revised 10/08/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|