LPO3310-152MLB 반도체 회로 부품 판매점
SMT Power Inductors
|
|
 Coilcraft |
Document 352-1
SMT Power Inductors - LPO3310
Part number1
L2 DCR3 SRF4
±20% max typ Isat5 Irms6
(µH) (Ohms) (MHz) (A) (A)
LPO3310-301ML_ 0.30 0.040 420 2.8 2.8
LPO3310-471ML_ 0.47 0.042 310 2.3 2.3
LPO3310-701ML_ 0.70 0.068 200 1.9 1.9
LPO3310-102ML_ 1.0 0.076 180 1.6 1.6
LPO3310-152ML_ 1.5 0.12 153 1.4 1.4
LPO3310-222ML_ 2.2 0.15 112 1.1 1.1
LPO3310-332ML_ 3.3 0.20 91 0.95 0.95
LPO3310-472ML_ 4.7 0.28 80 0.80 0.80
LPO3310-682ML_ 6.8 0.36 68 0.66 0.66
LPO3310-822ML_ 8.2 0.50 58 0.65 0.65
LPO3310-103ML_ 10
LPO3310-153ML_ 15
LPO3310-223ML_ 22
LPO3310-333ML_ 33
LPO3310-473ML_ 47
0.52
0.80
1.20
1.78
2.15
52 0.57 0.57
36 0.45 0.45
34 0.37 0.37
27 0.30 0.30
22 0.25 0.25
• Only 1.0 mm high, 3.3 mm square
• Handles current up to 2.8 Amps
Designer’s Kit C375 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 28.0 – 31.3 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+110°C with derated current
Storage temperature Component: –40°C to +110°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
Recommended pick and place nozzle OD: 3.3 mm; ID: ≤1.65 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. When ordering, please specify termination and packaging codes:
LPO3310-473MLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (3500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at which the inductance drops 10% (typ) from its value with-
out current.
6. Current that causes a 25°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 352-1 Revised 10/14/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 352-2
SMT Power Inductors - LPO3310 Series
Typical L vs Frequency
Typical L vs Current
100
47 µH
100
47 µH
10 10 µH 10 10 µH
1
0.1
0.01
1.0 µH
0.3 µH
0.1 1
Frequency (MHz)
1
0.1
10 0.01
1.0 µH
0.3 µH
0.1 1
Current (A)
10
Irms Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40
-20
0 20 40 60 80
Ambient temperature (°C)
100 120
XXX X
0.130 ±0.008
3,3 ±0,2
Dash
Internal
number
code
0.130 ±0.008
3,3 ±0,2
0.040 ±0.004
1,0 ± 0,1
0.040 ±0.05
1,02 ±0,127
Dimensions
are
in
inches
mm
Winding
direction
Recommended
Land Pattern
0.056
1,42
0.148
3,76
0.106
2,68
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 352-2 Revised 10/14/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
PDF 파일 내의 페이지 : 총 2 페이지
제조업체: Coilcraft
( coilcraft )
LPO3310-152MLB inductor
데이터시트 다운로드 :
[ LPO3310-152MLB.PDF ]
[ LPO3310-152MLB 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
LPO3310-152MLB
SMT Power Inductors - Coilcraft
LPO3310-152MLC
SMT Power Inductors - Coilcraft
LPO3310-152MLD
SMT Power Inductors - Coilcraft