AMIS-3062X 반도체 회로 부품 판매점
Bus Microstepping Motordriver Family
|
|
 AMI SEMICONDUCTOR |
AMI Semiconductor
AMIS-3062x Bus Microstepping Motordriver Family
Key Features
Motordriver
• Microstepping (1/2, 1/4, 1/8, 1/16)
• Low resonance & noise
• High resolution
• Programmable peak current up to 800mA
• 20kHz PWM current-control
• Automatic selection of fast and slow
decay mode
• Internal fly-back FETs
• Fully integrated current sense
• 8V-29V supply voltage
• Automotive compliant
• Full diagnostics and status information
Controller with RAM and OTP
• Position controller
• Configurable speeds, acceleration and
deceleration
• Flexible hold-current
• Movement/position sensor-input
• Optional stall detection
LIN Control Interface (AMIS-30621 only)
• Physical - and data-link - layer
(conform to LIN rev. 1.3)
• Dynamically allocated identifiers
• Up to 128 node addresses
Serial Interface (AMIS-30622 only)
• 2-wire serial interface
• 5V microcontroller compatible
• Up to 32 node addresses
Product Description
www.DataSheet4U.com
The AMIS-3062x is a stepper motordriver family with
position controller and control/diagnostics interface
integrated in one single chip.
The family consists of two products:
• AMIS-30621 with LIN interface, ready to build
dedicated mechatronics solutions connected remotely
with a LIN master.
• AMIS-30622 with SERIAL interface, ready to act as
peripheral device next to a microcontroller.
Protection
• Over-current protection
• Under-voltage management
• Over-voltage protection
• High-temp warning and shutdown
• Low-temp warning
• LIN bus short-circuit protection to supply and ground
Power Saving
• Power-down supply current <50µA
• 5V regulator with wake-up on LIN activity
EMI Compatibility
• Power drivers with slope control
The chip receives high-level positioning instructions
through the interface and subsequently drives the motor
coils until the desired position is reached. The on-chip
position controller is configurable (OTP and Interface)
for different motor types, positioning ranges and
parameters for speed, acceleration and deceleration.
The AMIS-3062x acts as a slave on the bus and the
master can fetch specific status information like actual
position, error flags, etc. from each individual slave
node.
Applications and Benefits
The AMIS-3062x family is ideally suited for small
positioning applications. Target markets include:
automotive (headlamp alignment, idle control, cruise),
industrial equipment (lighting, fluid control, labeling,
process, XYZ tables) and building automation (HVAC,
surveillance, satellite dish positioning). Suitable
applications typically have multiple axes or require
mechatronic solutions with the driver chip mounted
directly on the motor.
The high abstraction level of the products’ command set
reduces the load of the processor on the master side.
Scaling of the application towards number of axes is
straight-forward: hardware - and software designs are
extended in a modular way, without severely effecting the
demands on the master microcontroller. The bus structure
simplifies PCB track-layout and/or wiring architectures.
Microstepping operation removes the design trade-off
between minimal operation speed and avoiding the risk of
noise and step-loss due to resonance phenomena. The
stall-detection feature (optional) offers silent, yet accurate
position-calibrations during the referencing run and allows
semi-closed loop operation when approaching the
mechanical end-stops.
All these benefits result in reduced system-cost and time-
to-market and improved technical performance.
Ordering Codes
Part N°
Bus
Package
Peak Current
Temp Range
AMIS-30621
LIN
SOIC-20
800mA
-40°C…125°C
Part N°
Bus
Package
Peak Current
Temp Range
AMIS-30622
Serial
SOIC-20
800mA
-40°C…125°C
Functional Block Diagram
Typical Application
www.DataSheet4U.com
AMI Semiconductor
www.amis.com
© Copyright 2003 AMI Semiconductor – All rights reserved. Information furnished is believed to be accurate and reliable. However, AMI Semiconductor assumes no responsibility for errors or
omissions in the information and for the consequences of use of such information. AMI Semiconductor reserves the right to change the information contained herein at any time without notice.
This information is provided “AS IS” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability, fitness for a particular
purpose, or non-infringement of intellectual property.
All title and intellectual property rights including, without limitation, copyrights, trademarks, in and to this information and products are owned by AMI Semiconductor, and are protected by
applicable laws. No license under any patent or other intellectual property of AMI Semiconductor is granted, by implication, estoppel or otherwise.
|
PDF 파일 내의 페이지 : 총 2 페이지
제조업체: AMI SEMICONDUCTOR
( ami )
AMIS-3062X driver
데이터시트 다운로드 :
[ AMIS-3062X.PDF ]
[ AMIS-3062X 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
AMIS-30621
LIN Microstepping Motordriver - AMI SEMICONDUCTOR
AMIS-30622
Micro-Stepping Motor Driver - ON Semiconductor
AMIS-30623
Micro-stepping Motor Driver - ON Semiconductor
AMIS-30624
Micro-Stepping Motor Driver - ON Semiconductor
AMIS-3062X
Bus Microstepping Motordriver Family - AMI SEMICONDUCTOR