|
Aimtron Technology |
www.DataSheet4U.com
AT5683
Preliminary Product information
4-channel BTL Motor Driver for CD/CD-ROM
Features
˙4 channel BTL motor driver.
˙Wide dynamic range.(4V(typ.) at PreVcc=8V,
PowVcc=5V, RL=8Ω)
˙Separating Vcc into Pre and power (Power
divides into CH1/2/4 and CH3), can make
better power efficiency, by low supply voltage
drive.
˙Mute operated indivisually CH4 and CH1/2/3.
˙All channels mute is stand by mode.
˙Suitable for low operation voltage DSP by
wide D-range pre opamp.
˙Thermal shutdown circuit on chip.
˙Compatible with BA5983
Description
The AT5683 is a 4-channel BTL driver IC for
driving the motors in products such as CD/CD-
ROM drives. Suitable for low operation voltage
DSP by wide D-range pre opamp. Small surface
mounting power package (HSOP28).
Applications
CD drives, CD-ROM drives,
Block Diagram
Aimtron reserves the right without notice to change this circuitry and specifications.
10F-1, 55, Tong-Kuan Road, Hsinchu, Taiwan, R.O.C.
Tel: 886-3-575-3058
Fax: 886-3-575-3015
1
Email: [email protected]
http://www.aimtron.com.tw
04/09/24
AT5683
Preliminary Product information
4-channel BTL Motor Driver for CD/CD-ROM
Pin Descriptions
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Pin name
BIAS IN
OPIN1(+)
OPIN1(-)
OUTPUT1
OPIN2(+)
OPIN2(-)
OUTPUT2
GND
STBY1
PowVcc1
VO2(-)
VO2(+)
VO1(-)
VO1(+)
VO4(+)
VO4(-)
VO3(+)
VO3(-)
PowVcc2
STBY2
GND
OUTPUT3
OPIN3(-)
OPIN3(+)
OUTPUT4
OPIN4(-)
OPIN4(+)
PreVcc
Function
Input for Bias-amplifier
Op-amp positive input for CH1
Op-amp negative input for CH1
Op-amp output for CH1
Op-amp positive input for CH2
Op-amp negative input for CH2
Op-amp output for CH2
Substrate ground
Input for CH1/2/3 STBY control
Vcc for CH1/2/4 power block
Negative output of CH2
Positive output of CH2
Negative output of CH1
Positive output of CH1
Positive output of CH4
Negative output of CH4
Positive output of CH3
Negative output of CH3
Vcc for CH3 power block
Input for CH4 STBY control
Substrate ground
Op-amp output for CH3
Op-amp positive input for CH3
Op-amp negative input for CH3
Op-amp output for CH4
Op-amp positive input for CH4
Op-amp negative input for CH4
Vcc for pre block
Notes: Symbol of + and - ( output of drivers ) means polarity to input pin.
( For example if voltage of pin4 high, pin14 is high. )
PinOut
10F-1, 55, Tong-Kuan Road, Hsinchu, Taiwan, R.O.C.
Tel: 886-3-575-3058
Fax: 886-3-575-3015
2
Email: [email protected]
http://www.aimtron.com.tw
04/09/24
|