|
Elantec |
EL1509C - Product Brief
Medium Power Differential Line Driver
Features
• Drives up to 250mA from a +12V
supply
• 20VP-P differential output drive
into 100Ω
• -85dBc typical driver output
distortion at full output at 150kHz
• Low quiescent current of 7.5mA
per amplifier
Applications
• ADSL G.lite CO line driving
• ADSL full rate CPE line driving
• G.SHDSL, HDSL2 line driver
• Video distribution amplifier
• Video twisted-pair line driver
Ordering Information
Part No
EL1509CS
EL1509CL
Package
8-Pin SO
8-Pin LPP
Tape & Reel
Outline #
MDP0027
MDP0046
General Description
The EL1509C is a dual operational amplifier designed for customer
premise line driving in DMT ADSL solutions. This device features a
high drive capability of 250mA while consuming only 7.1mA of sup-
ply current per amplifier and operating from a single 5V to 12V
supply. This driver achieves a typical distortion of less than -85dBc, at
150kHz into a 25Ω load. The EL1509C is available in the industry
standard 8-pin SO as well as the thermally-enhanced 8-pin LPP pack-
age. Both are specified for operation over the full -40°C to +85°C
temperature range.
The EL1509C is ideal for ADSL, SDSL, HDSL2 and VDSL line driv-
ing applications.
Connection Diagrams
OUTA 1
INA- 2
INA+ 3
GND 4
-
+
-
+
8-Pin SO
8 VS
7 OUTB
6 INB-
5 INB+
OUTA 1
INA- 2
INA+ 3
GND 4
-
+
Amp A
-
+
Amp B
8 VS
7 OUTB
6 INB-
5 INB+
8-Pin LPP Top View
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
EL1509C - Product Brief
Medium Power Differential Line Driver
General Disclaimer
Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the cir-
cuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described
herein and makes no representations that they are free from patent infringement.
Elantec Semiconductor, Inc.
675 Trade Zone Blvd.
Milpitas, CA 95035
Telephone: (408) 945-1323
(888) ELANTEC
Fax: (408) 945-9305
European Office: +44-118-977-6020
Japan Technical Center: +81-45-682-5820
WARNING - Life Support Policy
Elantec, Inc. products are not authorized for and should not be used
within Life Support Systems without the specific written consent of
Elantec, Inc. Life Support systems are equipment intended to sup-
port or sustain life and whose failure to perform when properly used
in accordance with instructions provided can be reasonably
expected to result in significant personal injury or death. Users con-
templating application of Elantec, Inc. Products in Life Support
Systems are requested to contact Elantec, Inc. factory headquarters
to establish suitable terms & conditions for these applications. Elan-
tec, Inc.’s warranty is limited to replacement of defective
components and does not cover injury to persons or property or
other consequential damages.
2 Printed in U.S.A.
|