|
International Rectifier |
Series PVN013PbF
Microelectronic Power IC
HEXFET® Power MOSFET Photovoltaic Relay
Single-Pole, Normally-Open, 0-20V, 2.5A AC / 4.5A DC
General Description
The PVN013 Series Photovoltaic Relay at 100
milliohms features the lowest possible on-state
resistance in a miniature package — lower than a
comparable reed relay.
The PVN013 is a single-pole, normally open solid-
state relay. It utilizes a GenerationV HEXFET output
switch, driven by an integrated circuit photovoltaic
generator of novel construction. The output switch
is controlled by radiation from a GaAlAs light
emitting diode (LED) which is optically isolated from
the photovoltaic generator.
These units exceed the performance capabilities
of electromechanical relays in life, sensitivity, stable
on-resistance, low off-state leakage, miniaturization,
magnetic insensitivity and ruggedness. They are
ideally suited for switching high currents or low level
signals without distortion or injection of electrical
noise.
Series PVN013 Relays are packaged in a
6-lead molded DIP package with either thru-hole
or surface mount (gull-wing) terminals. They are
available in standard plastic shipping tubes or on
tape-and-reel. Please refer to part identification
information opposite.
Features
100mΩ On-Resistance
Extremely low off-state leakage
Bounce-free operation
2.5 - 4.5 Amp capacity
Linear AC/DC operation
4S,o0l0id0-SVtRaMteS
I/O isolation
reliability
UL recognized
ESD Tolerance:
4000V Human Body Model
500V Machine Model
Applications
Portable Electronics
Industrial Control
Computers and Peripheral Devices
Audio Equipment
Power Supplies and Power Distribution
Instrumentation
Part Identification
PVN013PbF
PVN013SPbF
PVN013S-TPbF
thru-hole
surface-mount
surface-mount, tape
and reel
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)
1 www.irf.com © 2015 International Rectifier
Submit Datasheet Feedback
May 12, 2015
Series PVN013PbF
Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified)
INPUT CHARACTERISTICS
Minimum Control Current (see figure 1)
Maximum Control Current for Off-State Resistance @ TA = +25°C
Control Current Range (Caution: current limit input LED, see figure 6)
Maximum Reverse Voltage
OUTPUT CHARACTERISTICS
Operating Voltage Range
Maximum Continuous Load Current @ TA=+40°C, 5mA Control (see figure 1)
A Connection
B Connection
C Connection
Maximum Pulsed Load Current @TA=+25°C, (100 ms @ 10% duty cycle)
A Connection
Maximum On-State Resistance @TA=+25°C, for 1A pulsed load, 5mA Control (see figure 4)
A Connection
B Connection
C Connection
Maximum Off-State Leakage @ TA=+25°C, ±16VDC
Maximum Turn-On Time @TA=+25°C (see figure 7), for 1A, 20 VDC load, 5mA Control
Maximum Turn-Off Time @TA=+25°C (see figure 7), for 1A, 20 VDC load, 5mA Control
Maximum Output Capacitance @ 20VDC (see figure 2)
Limits
3.0
0.4
3.0 to 25
6.0
Limits
0 to ±20
2.5
3.0
4.5
6.0
100
65
40
10
5.0
0.5
300
Units
mA
mA
mA
V
Units
V(DCorACpeak)
A (DC or AC)
A (DC)
A (DC)
A (DC or AC)
mΩ
nA
ms
ms
pF
GENERAL CHARACTERISTICS
Minimum Dielectric Strength, Input-Output
Minimum Insulation Resistance, Input-Output, @TA=+25°C, 50%RH, 100VDC
Maximum Capacitance, Input-Output
Maximum Pin Soldering Temperature (10 seconds maximum)
Ambient Temperature Range:
Operating
Storage
Limits
4000
1012
1.0
+260
-40 to +85
-40 to +100
Units
VRMS
Ω
pF
°C
International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications.
Users of this International Rectifier product in such applications assume all risks of such use and indemnify International
Rectifier against all damages resulting from such use.
Connection Diagrams
2 www.irf.com © 2015 International Rectifier
Submit Datasheet Feedback
May 12, 2015
|