|
Macronix International |
MX29GA129E C/F
MX29GA257E C/F
MX29GA129/257E C/F
DATASHEET
P/N:PM1503
REV. 0.01, AUG. 10, 2009
1
ADVANCED INFORMATION
MX29GA129E C/F
MX29GA257E C/F
SINGLE VOLTAGE 3V ONLY FLASH MEMORY
FEATURES
GENERAL FEATURES
• Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
• Word mode switchable
- 16,777,216 x 16
- 8,388,608 x 16
• 64KW uniform sector architecture
- MX29GA257E C/F: 256 equal sectors
- MX29GA129E C/F: 128 equal sectors
• 8-word page read buffer
• 32-word write buffer
• Latch-up protected to 100mA from -1V to 1.5xVcc
• Low Vcc write inhibit : Vcc ≤ VLKO
• Compatible with JEDEC standard
- Pinout and software compatible to single power supply Flash
• Deep power down mode
PERFORMANCE
• High Performance
- MX29GA257E C/F: 90ns (Vcc=3.0~3.6V), 100ns (Vcc=2.7~3.6V)
- MX29GA129E C/F: 90ns (Vcc=2.7~3.6V)
- Page access time: 25ns
- Fast program time: 11us/word
- Fast erase time: 0.6s/sector
• Low Power Consumption
- Low active read current: 30mA (typical) at 5MHz
- Low standby current: 30uA (typical)
• Typical 100,000 erase/program cycle
• 20 years data retention
SOFTWARE FEATURES
• Program/Erase Suspend & Program/Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being
erased
- Suspends sector program operation to read data from another sector which is not being program
• Status Reply
- Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface (CFI)
HARDWARE FEATURES
• Ready/Busy# (RY/BY#) Output
- Provides a hardware method of detecting program and erase operation completion
• Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal state machine to read mode
• WP#/ACC input pin
- Hardware write protect pin/Provides accelerated program capability
SECURITY
• Extra 128-word sector for security
- Features factory locked and identifiable, and customer lockable
• Advanced write protection function (Solid and Password Protect)
- Provides sector protect/unprotect function to disable or enable program or erase operation in the sector
P/N:PM1503
REV. 0.01, AUG. 10, 2009
2
|