|
SYNC POWER |
SPE0571
Single-Line ESD Protection Array
DESCRIPTION
The SPE0571 are designed by TVS device that is to
protect sensitive electronics from damage or latch-up due
to ESD. They are designed for use in applications where
board space is at a premium. SPE0571 will protect single
line, and may be used on line where the signal polarities
swing above and below ground.
SPE0571 offer desirable characteristics for board level
protection including fast response time, low operating and
clamping voltage, and no device degradation.
SPE0571 may be used to meet the immunity requirements
of IEC 61000-4-2, level 4. The small SOD-723 package
makes them ideal for use in portable electronics such as
cell phones, PDA’s, notebook computers, and digital
cameras.
APPLICATIONS
Cellular Handsets and Accessories
Cordless Phone
PDA
Notebooks and Handhelds
Portable Instrumentation
Digital Cameras
MP3 Player
FEATURES
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Protects single I/O lines
Working voltage: 5V
Low leakage current
Low operating and clamping voltages
PIN CONFIGURATION ( SOD-723 )
PART MARKING
2011/01/11 Ver.3
Page 1
SPE0571
Single-Line ESD Protection Array
ORDERING INFORMATION
Part Number
SPE0571D72RG
※ SPE0571D72RG : Tape Reel ; Pb – Free
Package
SOD-723
Part Marking
7
ABSOULTE MAXIMUM RATINGS
(TA=25℃ Unless otherwise noted)
Parameter
Peak Pulse Power ( tp = 8/20 μs )
Maximum Peak Pulse Current ( tp = 8/20 μs )
ESD per IEC 61000 – 4 – 2 (Air )
ESD per IEC 61000 – 4 – 2 (Contact )
Operating Junction Temperature
Storage Temperature Range
Lead Soldering Temperature
Symbol
Ppk
Ipp
Vpp
Vpp
TJ
TSTG
TL
Typical
250
7
±15
±8
-55 ~ 125
-55 ~ 150
260 ( 10sec )
Unit
W
A
KV
KV
℃
℃
℃
ELECTRICAL CHARACTERISTICS
(TA=25℃ Unless otherwise noted)
Parameter
Reverse Stand – Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
Clamping Voltage
Clamping Voltage
Junction Capacitance
Symbol
Conditions
Min. Typ Max. Unit
VRWM
5V
VBR It = 1mA
6
V
IR VRWM = 5V , T=25℃
0.01 1 μA
VC Ipp = 1A , tp = 8/20 μs
11.5 V
VC Ipp = 7A , tp = 8/20 μs
Cj
Between I/O Pin and GND
VR = 0V , f = 1MHz
15 V
10 20 pF
TYPICAL CHARACTERISTICS
2011/01/11 Ver.3
Page 2
|