HIH-3610-003 반도체 회로 부품 판매점
Molded thermoset plastic housing with cover
|
|
 ETC |
Humidity Sensors
Humidity Sensor
HIH-3610 Series
FEATURES
• Molded thermoset plastic
housing with cover
• Linear voltage output vs
%RH
• Laser trimmed
interchangeability
• Low power design
• High accuracy
• Fast response time
• Stable, low drift
performance
• Chemically resistant
TYPICAL APPLICATIONS
• Refrigeration
• Drying
• Metrology
• Battery-powered systems
• OEM assemblies
The HIH-3610 Series humidity sensor is designed specifically for high
volume OEM (Original Equipment Manufacturer) users. Direct input to a
controller or other device is made possible by this sensor’s linear voltage
output. With a typical current draw of only 200 µA, the HIH-3610 Series is
ideally suited for low drain, battery operated systems. Tight sensor
interchangeability reduces or eliminates OEM production calibration costs.
Individual sensor calibration data is available.
The HIH-3610 Series delivers instrumentation-quality RH (Relative
Humidity) sensing performance in a low cost, solderable SIP (Single In-line
Package). Available in two lead spacing configurations, the RH sensor is a
laser trimmed thermoset polymer capacitive sensing element with on-chip
integrated signal conditioning. The sensing element's multilayer
construction provides excellent resistance to application hazards such as
wetting, dust, dirt, oils, and common environmental chemicals.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency stop devices, or in
any other application where failure of the product could result in personal
injury.
Failure to comply with these instructions could result in death or
serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do
not use this document as system installation information
• Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.
Sensing and Control
Humidity Sensors
Humidity Sensor
HIH-3610 Series
TABLE 1: PERFORMANCE SPECIFICATIONS
Parameter
RH Accuracy(1)
RH Interchangeability
Condition
±2% RH, 0-100% RH non-condensing, 25 °C, Vsupply = 5 Vdc
±5% RH, 0-60% RH; ±8% @ 90% RH typical
RH Linearity
±0.5% RH typical
RH Hysteresis
±1.2% RH span maximum
RH Repeatability
±0.5% RH
RH Response Time, 1/e
15 sec in slowly moving air at 25 °C
RH Stability
±1% RH typical at 50% RH in 5 years
Power Requirements
Voltage Supply
4 Vdc to 5.8 Vdc, sensor calibrated at 5 Vdc
Current Supply
200 µA at 5 Vdc
Voltage Output
Vsupply = 5 Vdc
Drive Limits
Vout = Vsupply (0.0062(Sensor RH) + 0.16), typical @ 25 °C
(Data printout option provides a similar, but sensor specific, equation at 25 °C.)
0.8 Vdc to 3.9 Vdc output @ 25 °C typical
Push/pull symmetric; 50 µA typical, 20 µA minimum, 100 µA maximum
Turn-on ≤ 0.1 sec
Temperature Compensation True RH = (Sensor RH)/(1.093 -0.0021T), T in °F
Effect @ 0% RH
Effect @ 100% RH
True RH = (Sensor RH)/(1.0546-0.00216T), T in °C
±0.007 %RH/°C (negligible)
-0.22% RH/°C (<1% RH effect typical in occupied space systems above 15 °C (59 °F))
Humidity Range
Operating
0 to 100% RH, non-condensing(1)
Storage
0 to 90% RH, non-condensing
Temperature Range
Operating
Storage
Package(2)
-40 °C to 85 °C (-40 °F to 185 °F)
-51 °C to 125 °C (-60 °F to 257 °F)
Three pin, solderable SIP in molded thermoset plastic housing with thermoplastic
cover
Handling
Static sensitive diode protected to 15 kV maximum
Notes:
1. Extended exposure to ≥ 90% RH causes a reversible shift of 3% RH.
2. This sensor is light sensitive. For best results, shield the sensor from bright light.
2 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
|
PDF 파일 내의 페이지 : 총 4 페이지
제조업체: ETC
( etc )
HIH-3610-003 data
데이터시트 다운로드 :
[ HIH-3610-003.PDF ]
[ HIH-3610-003 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
HIH-3610-001
Molded thermoset plastic housing with cover - ETC
HIH-3610-002
Molded thermoset plastic housing with cover - ETC
HIH-3610-003
Molded thermoset plastic housing with cover - ETC
HIH-3610-004
Molded thermoset plastic housing with cover - ETC