|
Toshiba Semiconductor |
TL(BG,RP)A1100(T11)
TOSHIBA LED Lamps
www.DataSheet4U.com
TLBGA1100(T11), TLRPA1100(T11)
Panel Circuit Indicator
Unit: mm
• Surface-mount devices
• 3.2 (L) × 2.9 (W) × 1.9 (H) mm
• UV LED chip + RGB phosphor
• Colors: bluish green, reddish purple
• Topr / Tstg = -40 to 100°C
• Reflow soldering is possible
• Applications: automotive use,
backlighting, etc.
• Standard embossed tape packing: T11 (2000/reel)
8-mm tape reel
Color and Material
Product Name
TLBGA1100
TLRPA1100
Color
Bluish Green
Reddish Purple
Material
GaN
GaN
JEDEC
JEITA
TOSHIBA
Weight: 0.035 g (typ.)
―
―
―
Absolute Maximum Ratings (Ta = 25°C)
Product Name
TLBGA1100
TLRPA1100
Forward Current
IF (mA)
Please see Note 1
Power Dissipation
PD (mW)
30 126
Operation
Temperature
Topr (°C)
−40~100
Storage
Temperature
Tstg (°C)
−40~100
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Forward current derating
IF – Ta
35
30
25
20
15
10
5
0
0 20 40 60 80 100 120
Ambient Temperature Ta (°C)
1 2007-10-01
Electrical Characteristics (Ta = 25°C)
Product Name
TLBGA1100
TLRPA1100
Unit
Forward Voltage VF
Min Typ. Max
IF
⎯ 3.5 4.2
20
⎯ 3.5 4.2
V mA
TL(BG,RP)A1100(T11)
www.DataSheet4U.com
Reverse Current VR
Min Typ. Max
IR
⎯ 0.75 ⎯
⎯ 0.75 ⎯
10
V mA
Optical Characteristics–1 (Ta = 25°C)
Product Name
TLBGA1100
TLRPA1100
Unit
Luminous Intensity IV
Min Typ. Max
63 100 320
IF
20
40 70 200 20
mcd mA
Available Iv rank (Note 2)
QA / RA / SA
PA / QA / RA
Note 2: The specification as following table is used for Iv classification of LEDs in Toshiba facility.
Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Rank symbol
PA
QA
RA
SA
Unit
Iv rank
Min
40
63
100
160
mcd
Max
80
125
200
320
mcd
Optical Characteristics–2 (Ta = 25°C)
Product Name
TLBGA1100
TLRPA1100
Chromaticity x Cx
Min Typ. Max
⎯ 0.15 ⎯
⎯ 0.35 ⎯
Chromaticity y Cy
Min Typ. Max
IF
⎯ 0.32 ⎯
20mA
⎯ 0.20 ⎯
Note 3: Ultraviolet light luminescence
These LED lamps also emit some UV light. (Around 360~400nm)
When these LED lamps are used for general indicator, it is no problem. However the LEDs are not
recommended for the following applications.
(1) Prohibition
- Human eye is damaged by the condensed light. (Ex. microscope, outer lens, etc)
(2) Notice
- LEDs are located at near a skin (the distance is less than 20mm), and exposure time is more than 60 min.
- Photosensitive material is used with these LEDs in a set. It might be damaged by the light.
Note 4: Do not break, cut or pulverize the products.
Note 5:
This product is designed as a general display light source usage, and it has applied the measurement
standard that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of
functional application (ex. Light source for sensor, optical communication and etc) except general display
light source.
2 2007-10-01
|