|
Vishay Siliconix |
www.datasheet4u.com
DG2616, DG2617, DG2618
Vishay Siliconix
Low Voltage, Dual SPDT Analog Switch
with Charge Pump
DESCRIPTION
The DG2616, DG2617, DG2618 are monolithic CMOS
analog switching products designed for high performance
switching of analog signals. Combining low power, high
speed, low on-resistance and small physical size, the
DG2616, DG2617, DG2618 are ideal for portable and
battery powered applications.
The DG2616, DG2617, DG2618 have built-in charge-pump
circuitry which lowers the minimum supply voltage to + 1.5 V
while maintaining low on-resistance. The Control circuitry
allows the DG2616, DG2617, DG2618 to operate in different
configurations.
Built on Vishay Siliconix's low voltage process, the DG2616,
DG2617, DG2618 has an epitaxial layer that prevents
latch-up. Break-before-make is guaranteed.
The DG2616, DG2617, DG2618 are manufactured in space
saving DFN-10 (3.0 x 3.0 mm). And as a committed partner
to the community and the environment, Vishay Siliconix
manufactures this product with lead (Pb)-free device
terminations and is 100 % RoHS compliant.
FEATURES
• Low voltage operation (1.5 V to 3.6 V)
• Low on-resistance - RON: 4.2 Ω typ. at 2.7 V
• Fast switching: tON = 39 ns
tOFF = 8 ns
• DFN-10 package
BENEFITS
• Reduced power consumption
• High accuracy
• Reduce board space
• TTL/1.8 V logic compatible
• High bandwidth
APPLICATIONS
• Cellular phones
• Audio and video signal routing
• PCMCIA cards
• Battery operated systems
RoHS
COMPLIANT
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
TRUTH TABLE DG2616
Logic
NC1, 2
0 ON
1 OFF
NO1, 2
OFF
ON
TRUTH TABLE DG2618
SHDN/EN Logic IN Logic NC1, 2
0 0 ON
0 1 OFF
1 x OFF
NO1, 2
OFF
ON
OFF
Charge Pump
ON
ON
OFF
TRUTH TABLE DG2617
SHDN/EN Logic IN Logic NC1, 2 NO1, 2 Charge Pump
0
0 ON OFF
ON
0
1 OFF ON
ON
1
0 ON OFF
OFF
1
1 OFF ON
OFF
ORDERING INFORMATION
Temp. Range
Package
Part Number
- 40 °C to 85 °C
DFN-10
DG2616DN-T1-E4
DG2617DN-T1-E4
DG2618DN-T1-E4
Document Number: 74411
S-82149-Rev. B, 08-Sep-08
www.vishay.com
1
DG2616,www.datasheet4u.com DG2617, DG2618
Vishay Siliconix
IN1 1
IN2 2
GND 3
COM1 4
COM2 5
DG2616
Top View
10 V+
9 NC1
8 NC2
7 NO1
6 NO2
IN1 1
SHDN/EN 2
GND 3
COM1 4
COM2 5
DG2617/DG2618
Top View
10 V+
9 NC1
8 NC2
7 NO1
6 NO2
ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted
Parameter
Limit
Unit
Reference to GND
V+
IN, COM, NC, NOa
- 0.3 to 6.0
- 0.3 to (V+ + 0.3)
V
Current (Any terminal except NO, NC or COM)
30
Continuous Current (NO, NC, or COM)
± 150
mA
Peak Current (Pulsed at 1 ms, 10 % Duty Cycle)
± 300
Storage Temperature (D-Suffix)
Package Solder Reflow Conditionsd
Power Dissipation (Packages)b
DFN-10c
- 65 to 150
1191
°C
mW
Notes:
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 14.9 mW/°C above 70 °C
d. Manual soldering with iron is not recommended for leadless components. The DFN-10 is a leadless package. The end of the lead terminal is
exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be
guaranteed and is not required to ensure adequate bottom side solder interconnection.
www.vishay.com
2
Document Number: 74411
S-82149-Rev. B, 08-Sep-08
|