|
ATMEL Corporation |
Features
• SRwAwMwb.DaastaeSdhFePetG4UA.cdoemsigned for Space use
– 280K equivalent ASIC gates
– Unlimited reprogrammability
– SEE hardened cells (Configuration RAM, FreeRAMTM, DFF, JTAG, I/O buffers)
– No need for Triple Modular Redundancy (TMR)
• FreeRAM™:
– 115200 Bits of Distributed RAM
– 32x4 RAM blocks organization
– Independent of Logic Cells
– Single/Dual Port capability
– Synchronous/Asynchronous capability
• Global Reset Option
• 8 Global Clocks and 4 Fast Clocks
• 8 LVDS transceivers and 8 LVDS receivers
• Cold sparing and PCI Compliant I/Os
– 308 for 472pins MCGA package
– 150 for 256pins MQFPF package
• Flexible Configuration modes
– Master/Slave Capability
– Serial/Parallel Capability
– Check of the data during FPGA configuration
• Self Integrity Check (SIC) of the configuration during FPGA operation
• Performance
– 100 MHz Internal Performance
– 50MHz System Performance
– 10ns 32X4 FreeRAM™ access time
• Operating range
– Voltages
• 1.65V to 1.95V (Core)
• 3V to 3.6V (Clustered I/Os)
– Temperature
• - 55°C to +125°C
• Radiation Performance
– Total Dose tested up to 300 krads (Si)
– No single event latch-up below a LET of 80 MeV/mg/cm2
• ESD better than 2000V
• Quality Grades
– QML-Q or V
– ESCC
• Ceramic packages
– 256pins MQFPF (150 I/Os, 8 LVDS Tx and 8 LVDS Rx)
– 472pins MCGA (308 I/Os, 8 LVDS Tx and 8 LVDS Rx)
• Design Kit including
– ATF280E and Configurator Samples
– Evaluation Board
– Software Design Tools
– ISP Cable/Dongle
Rad Hard
Reprogrammable
FPGA
ATF280E
Advance
Information
7750A–AERO–07/07
1. Description
www.DataSheet4U.com The ATF280E is a radiation hardened SRAM-based reprogrammable FPGA. It has been espe-
cially designed for space application by implementing hardened cells and permanent self-
integrity check mechanism.
The ATF280E is manufactured using the ATMEL 0.18µ rad-hard AT58KRHA CMOS technology.
The Atmel architecture is developed to provide the highest levels of performance, functional
density and design flexibility in an FPGA. The cells in the Atmel array are small, efficient and can
implement any pair of Boolean functions of (the same) three inputs or any single Boolean func-
tion of four inputs. The cell’s small size leads to arrays with large numbers of cells, greatly
multiplying the functionality in each cell. A simple, high-speed busing network provides fast, effi-
cient communication over medium and long distances.
The ATF280E FPGA offers a patented distributed 10 ns SEU hardened SRAM capability where
the RAM can be used without losing logic resources. Multiple independent, synchronous or
asynchronous, dual port or single port RAM functions (FIFO, scratch pad, etc.) can be created
using Atmel’s macro generator tool. They are organized by blocks of 32x4 bits. The ATF280E
also embeds 8 global clocks, 4 high speed clocks, 8 LVDS Transmit channels, 8 LVDS Receive
channels and a complete set of cold sparing programmable I/Os. The ATF280E I/Os are fully
PCI-compliant.
The ATF280E is available in two space qualified packages. The MCGA472 package offers up to
324 I/Os for user application. The MQFP256 package is also proposed for application requiring
less than 166 I/Os.
2 ATF280E
7750A–AERO–07/07
|