AT49BV640D 반도체 회로 부품 판매점
64-megabit (4M x 16) 3-volt Only Flash Memory
|
|
 ATMEL Corporation |
Features
• Sinwgwlew.VDoalttaaSgheeeOt4pUe.rcaotmion Read/Write: 2.65V - 3.6V
• Access Time – 70 ns
• Sector Erase Architecture
– One Hundred Twenty-seven 32K Word (64K Bytes) Main Sectors with
Individual Write Lockout
– Eight 4K Word (8K Bytes) Sectors with Individual Write Lockout
• Fast Word Program Time – 10 µs
• Typical Sector Erase Time: 32K Word Sectors – 700 ms; 4K Word Sectors – 100 ms
• Suspend/Resume Feature for Erase and Program
– Supports Reading and Programming Data from Any Sector by Suspending
Erase of a Different Sector
– Supports Reading Any Word by Suspending Programming of Any Other Word
• Low-power Operation
– 10 mA Active
– 15 µA Standby
• VPP Pin for Write Protection and Accelerated Program Operation
• WP Pin for Sector Protection
• RESET Input for Device Initialization
• Flexible Sector Protection
• Top or Bottom Boot Block Configuration Available
• 128-bit Protection Register
• Minimum 100,000 Erase Cycles
• Common Flash Interface (CFI)
• Green (Pb/Halide-free/RoHS Compliant) Packaging
64-megabit
(4M x 16)
3-volt Only
Flash Memory
AT49BV640D
AT49BV640DT
1. Description
The AT49BV640D(T) is a 2.7-volt 64-megabit Flash memory organized as 4,194,304
words of 16 bits each. The memory is divided into 135 sectors for erase operations.
The device is offered in a 48-ball CBGA package. The device has CE and OE control
signals to avoid any bus contention. This device can be read or reprogrammed using
a single power supply, making it ideally suited for in-system programming.
The device powers on in the read mode. Command sequences are used to place
the device in other operation modes such as program and erase. The device has
the capability to protect the data in any sector (see “Flexible Sector Protection” on
page 6).
To increase the flexibility of the device, it contains an Erase Suspend and Program
Suspend feature. This feature will put the erase or program on hold for any amount of
time and let the user read data from or program data to any of the remaining sectors
within the memory.
The VPP pin provides data protection. When the VPP input is below 0.4V, the program
and erase functions are inhibited. When VPP is at 1.65V or above, normal program
and erase operations can be performed. With VPP at 10.0V, the program (Dual-word
Program command) operation is accelerated.
3608C–FLASH–11/06
2. wPwwi.nDatCaSohenetf4iUg.coumrations
Pin Name
A0 - A21
CE
OE
WE
RESET
VPP
I/O0 - I/O15
NC
VCCQ
WP
Pin Function
Addresses
Chip Enable
Output Enable
Write Enable
Reset
Write Protection and Power Supply for Accelerated Program Operations
Data Inputs/Outputs
No Connect
Output Power Supply
Write Protect
2.1 48-ball CBGA – Top View
1 2 3 4 5 6 78
A
A13 A11 A8 VPP WP A19 A7 A4
B
A14 A10 WE RESET A18 A17 A5 A2
C
A15 A12 A9 A21 A20 A6 A3 A1
D
A16 I/O14 I/O5 I/O11 I/O2 I/O8 CE A0
E
VCCQ I/O15 I/O6 I/O12 I/O3 I/O9 I/O0 GND
F
GND I/O7 I/O13 I/O4 VCC I/O10 I/O1 OE
2 AT49BV640D(T)
3608C–FLASH–11/06
|
PDF 파일 내의 페이지 : 총 30 페이지
제조업체: ATMEL Corporation
( atmel )
AT49BV640D data
데이터시트 다운로드 :
[ AT49BV640D.PDF ]
[ AT49BV640D 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
AT49BV640D
64-megabit (4M x 16) 3-volt Only Flash Memory - ATMEL Corporation
AT49BV640DT
64-megabit (4M x 16) 3-volt Only Flash Memory - ATMEL Corporation
AT49BV640S
64-megabit (4M x 16) Secure 3-volt Only Memory - ATMEL Corporation
AT49BV640ST
64-megabit (4M x 16) Secure 3-volt Only Memory - ATMEL Corporation