|
ATMEL Corporation |
www.DataSheet4U.com
Features
• Programmable AVR® 8-bit Flash Microcontroller Transmitter IC
• Frequency: 315 MHz (ATA6285) and 433 MHz (ATA6286)
• Support ASK/FSK Modulation with Integrated FSK Switch
• 6 dBm Output Power with Typically 8.5 mA Active Current Consumption in
Transmission Mode
• Low-power Microcontroller Requires Typically 0.6 µA Sleep Current with Active Interval
Timer
• Interfaces for Simple Capacitive Sensors (2 pF to 6 pF)
• One Interface Can Be Configured for Motion Wake-up (3 pF to 5 pF)
• Typically 25 mbar ADC Resolution for Pressure Measurement with Dedicated Sensor
Type
• Low-power Measurement Mode for Directly Connected Capacitive Sensors Typically
200 µA at 1 MHz System Clock
• Programmable 125 kHz Wake-up Receiver Channel with Typically 1.7 µA Current
Consumption in Listing Mode
• 2V to 3.6V Operation Voltage for Single Li-cell Power Supply
• –40°C to +125°C Operation Temperature and –40°C to +150°C Storage Temperature
• Less then 10 External Passive Components
• QFN32 (5 mm × 5 mm) Package
1. Description
ATA6285 and ATA6286 are highly integrated smart RF micro transmitter ICs for
315 MHz and 433 MHz, suited for ASK and FSK with typically 20 Kbits/s data rate in
Manchester mode. The devices combine the functionality of the RF transmitter ICs
ATA5756/ATA5757 with the programmable low-power AVR 8-bit Flash microcontroller
in a single QFN32 package (5 mm × 5 mm). The ATA6285 and ATA6286 include a
dedicated ADC interface for simple capacitive sensors as well as an on-chip tempera-
ture sensor. Three sensor interfaces are available for a capacitive range of 2 pF to
16 pF, where one channel can be configured as motion wake-up in the range of 3 pF
to 5 pF. The ICs are suited for use in tire pressure monitoring (TPMS) sensor gauges
in combination with external sensor devices.
The programmable AVR 8-bit Flash microcontroller includes 8 Kbytes of in-system
self-programmable Flash memory and an 320-Bytes EEPROM, thus allowing the sys-
tem integrator to install field-programmable firmware to enable system flexibility on
different platforms. ATA6285 and ATA6286 can be configured to guarantee extremely
low power consumption in sleep mode and measurement mode. They also include a
programmable 125 kHz wake-up receiver channel for extremely low current consump-
tion in listening mode. The ICs are designed for use in applications with typically less
then 10 passive components: one external crystal for the sensor gauge, several
capacitors, a single LiMnO2 battery coin cell, a single-ended antenna for the data
transmission and an LF ferrite coil for the wake-up channel. ATA6285 and ATA6286
support TPMS-specific low-current modes even with an active brown-out detection
and an interval timer.
TPMS Control
and Transmitter
IC
ATA6285
ATA6286
Summary
Preliminary
NOTE: This is a summary document.
The complete document is available
under NDA. For more information,
please contact your local Atmel sales
office.
4958AS–AUTO–09/06
DataSheet4 U .com
www.DataSheet4U.com
2. Overview
2.1 Application
Figure 2-1. Tire Pressure Monitoring System (TPMS)
VDD
Battery
XZ
Motion
sensor
Pressure
sensor
16 15 14 13 12 11 10 9
17 8
18 7
19 6
20 ATA6285/
21 ATA6286
5
4
22 3
23 2
24 1
25 26 27 28 29 30 31 32
*) ISP interface
*) ISP: In-System-Programmable
Flash interface
Crystal Frequency 13.56 MHz for 433 MHz application
Crystal Frequency 13.125 MHz for 315 MHz application
RF
loop antenna
2 ATA6285/ATA6286 [Preliminary]
DataSheet4 U .com
4958AS–AUTO–09/06
|