|
Freescale Semiconductor |
www.DataSheet4U.com
Freescale Semiconductor
Technical Data
±2.5g - 10g Two Axis Low-g
Micromachined Accelerometer
The MMA6281QT low cost capacitive micromachined accelerometer features
signal conditioning, a 1-pole low pass filter, temperature compensation and g-
Select which allows for the selection among 4 sensitivities. Zero-g offset full scale
span and filter cut-off are factory set and require no external devices. Includes a
Sleep Mode that makes it ideal for handheld battery powered electronics.
Features
• Selectable Sensitivity (2.5g/3.3g/6.7g/10g)
• Low Current Consumption: 500 µA
• Sleep Mode: 3 µA
• Low Voltage Operation: 2.2 V – 3.6 V
• 6mm x 6mm x 1.45mm QFN
• Fast Turn On Time
• High Sensitivity (2.5 g)
• Integral Signal Conditioning with Low Pass Filter
• Robust Design, High Shocks Survivability
• Environmentally Preferred Package
• Low Cost
Typical Applications
• Portable Applications: Tilt Monitoring Anti-Theft
• Vibration Monitoring and Recording: Appliance Balance, Seismic,
Smart Motors)
• Pedometer: Motion Sensing
• PDA: Text Scroll
• Navigation and Dead Reckoning: E-Compass Tilt Compensation
• Gaming: Tilt and Motion Sensing, Event Recorder
• Robotics: Motion Sensing
• Impact Monitoring (Shipping, Handling, Black Box Event Recorder)
Device
MMA6281QT
MMA6281QR2
ORDERING INFORMATION
Temp. Range
Case No.
Package
– 20 to +85°C
1622-02
QFN-16, Tray
– 20 to +85°C
1622-02
QFN-16,Tape & Reel
Document Number: MMA6281QT
Rev 0, 10/2006
MMA6281QT
MMA6281QT: XZ AXIS
ACCELEROMETER
± 2.5g/3.3g/6.7g/10g
Bottom View
16-LEAD
QFN
CASE 1622-02
Top View
g-Select1 1
g-Select2 2
VDD 3
VSS 4
16 15 14 13
12
Sleep
Mode
11 N/C
10 N/C
9 N/C
5678
Figure 1. Pin Connections
© Freescale Semiconductor, Inc., 2006. All rights reserved.
www.DataSheet4U.com
g-Select1
g-Select2
Sleep Mode
G-Cell
Sensor
VDD
Oscillator
Clock
Generator
C to V
Converter
Gain
+
Filter
Control Logic
EEPROM Trim Circuits
X-Temp
Comp
Z-Temp
Comp
XOUT
ZOUT
VSS
Figure 2. Simplified Accelerometer Functional Block Diagram
Table 1. Maximum Ratings
(Maximum ratings are the limits to which the device can be exposed without causing permanent damage.)
Rating
Symbol
Value
Maximum Acceleration (all axis)
Supply Voltage
Drop Test(1)
Storage Temperature Range
1. Dropped onto concrete surface from any axis.
gmax
VDD
Ddrop
Tstg
±2000
–0.3 to +3.6
1.8
–40 to +125
Unit
g
V
m
°C
ELECTRO STATIC DISCHARGE (ESD)
WARNING: This device is sensitive to electrostatic
discharge.
Although the Freescale accelerometer contains internal
2000 V ESD protection circuitry, extra precaution must be
taken by the user to protect the chip from ESD. A charge of
over 2000 volts can accumulate on the human body or
associated test equipment. A charge of this magnitude can
alter the performance or cause failure of the chip. When
handling the accelerometer, proper ESD precautions should
be followed to avoid exposing the device to discharges which
may be detrimental to its performance.
MMA6281QT
2
Sensors
Freescale Semiconductor
|