RNP-20SxxxxZ00 반도체 회로 부품 판매점
(RNP20SxxxZ00) 35W High Power Resistors
|
|
 Nikkohm |
www.DataSheet4U.com
POWER SOLUTION - NIKKOHM
TO220 35W HIGH POWER RESISTORS
RNP20S
RoHS
Features and Applications
35W high power resistors in TO220 style molded package for through-hole (35W) and surface mount
(20W).
Non-inductive design suits high frequency applications and high-speed pulse circuits.
Low, 3.3 C/W heat resistance from resistor hot spot to flange presented by thin film metallization
technology.
Wide, 20 milliohm to 220 ohm resistance range, non-inductive impedance characteristic and heat
venting through insulated metal tab aids circuit designers.
Small size and thin profile suits high-density compact installations.
Complete thermal conduction, heat dissipation design and vibration durable design to be available.
Application in SW PS, power unit of machines, motor control, drive circuits, automobiles,
measurements, and industrial computers.DataSheet4U.com
Dimensional Specifications (mm)
DataShee
DD
N
M
K
L
A
H
J
C
RNP20S---Z00
mm +/-mm
A 8.5 +/-0.2
B 12.0 +/-0.2
C 3.1 +/-0.2
D 3.1 +/-0.1
E 17.0 +/-1.0
F 3.2 +/-0.5
G 3.8 +/-0.2
H 1.75 +/-0.1
J 0.5 +/-0.05
K 0.6 +/-0.05
L 1.4 +/-0.05
M 5.08 +/-0.1
M
K
L
N
A
K
J
H
C
RNP20S---Z10
mm +/-mm
A 10.1 +/-0.2
B 15.0 +/-0.2
C 4.5 +/-0.2
D 3.6 +/-0.1
E 5.0 +/-1.0
F 2.5 +/-0.5
G 3.0 +/-0.2
H 2.75 +/-0.2
J 0.5 +/-0.05
K 0.75 +/-0.05
L 1.5 +/-0.05
M 5.08 +/-0.10
N 1.5 +/-0.05
Ordering Information
P/N
Type
TC
Resistance (1) Tolerance
Additional Code(3)
RNP20SH0R05JZ00
RNP20S
H(100ppm and more)
0.05ohm
J(5%)
Z00 (through-hole)
RNP20SA0R1JZ00
RNP20S
A(100ppm)
0.1ohm
J(5%)
Z00 (through-hole)
RNP20SC101FZ00
RNP20S
C(50ppm)
100ohm
F(1%)
Z00 (through-hole)
RNP20SC221FZ00
RNP20S
C(50ppm)
220ohm
F(1%)
Z00 (through-hole)
RNP20SC100FZ10
RNP20S
C(50ppm)
10ohm
F(1%)
Z10 (surface mount)
RNP20SC221FZ10
RNP20S
C(50ppm)
220ohm
F(1%)
Z10 (surface mount)
Note: (1) When ordering, additional ohmic resistance notation is recommended.
(2) First digit of additional code, “Z” shows compliance with RoHS, its terminals are Tin plated. Second digit “0” shows
normal, “1” is surface mount style.
(3) Standard packaging is RoHS PS/PE tube packaging, which contains 50pcs / tube. When ordering, note (Tube) or
(Tray) are recommended.
DataSheet4U.c(o4)mPower rating of SMD, RNP20S---Z10 and over 220 ohm resistance are restricted in 20W.
DataSheet4 U .com
www.DataSheet4U.com
POWER SOLUTION - NIKKOHM
RoHS
30W HIGH POWER RESISTORS
RNP20S
Specifications
Items
Specification-Performance
Test Conditions
Rating Power
35 Watt *1
-55 to 25 deg C flange temperature
Rating Power
1 Watt
Free air.
Heat Resistance
3.3 C/W
Hot spot to flange
Resistance Range
0.02-0.091ohm 0.1-9.1ohm
10-220ohm 220-51k ohm are available, see Note
Nominal Resistance
E6
E24 E24 Include 2.5 and 5.0
TCR(ppm/K)
250(H) *3
100 (A)*3
50 (C)
-55 to +155 deg C
Tolerance
5%(J)
1% (F) 5% (J)
+/-1% (F)
Operation Temp.
-55C to+155C
Max. Operating Volt.
Withstanding Volt.
500V or P ⋅ R
DC2200 Volt. (AC1500V)
Between terminal and flange, 60 seconds.
Load Life
+/-1.0%
+/-(1.0 %+0.05 ohm)
25C, 90 min.ON,30min.OFF,1000hours.
Humidity
+/-1.0%
+/- (1.0 %+0.05 ohm)
40C, 90-95%RH, DC 0.1W, 1000 hours.
Temp. Cycle
+/-1.0%
+/- (0.25 %+0.05 ohm)
-55 C,30 min.,+155 C,30 min., 5cycles
Soldering Heat
+/-0.5%
+/- (0.1 %+0.05 ohm)
350+/-5 deg C, 3seconds,
Solder ability
Over 95% of surface
230+/-5 deg C, 3seconds.
Insulation Resistance
Over 1,000 Meg ohm
Between terminals and flange.
Vibration
+/-0.5%
+/- (0.25 %+0.05 ohm)
Note: (*1) At resistance from 220 to 51kohms rating power shall be restricted in 20W.
Note: (*2) Resistance measuring position is at low end of stand-off.
Note: (*3) TC in range from 0.01ohm to 0.10 ohm exceed 100 - 250ppm/deg C, but shows by symbol A or H.
Derating
Temperature Rise
Typical TCR in Low Ohms
et4U.com
Rating Power (w)
50
40
30
20
10
0
-55
0 50 100 150
Flange Temperature (deg C)
200
Temperature Rise (deg C)
100
80
60
40
20
0
0
DataSHhoet septo4t tUem.pceoramture of
resistor referred to
flange temperature.
10 20
30 40
Applied Power (W)
50
TCR (ppm/deg C) at 0 to 100 deg C
250
200
150
100
50
0
0.01
0.1
Resistance (Ohms)
1.0
Pulse Energy Durability
One time rectangular impulse test.
10K
RNP-20SC100F
Pulse Peak Watt (Watts)
1K
Frequency Characteristics
Impedance (ohm)
1k
RNP-20S C1K0F
RNP-20S C101F
100
RNP-20S C100F
100 10
RNP-20S C500F
RNP-20S C220F
10
1µ
10µ 100µ 1m 10m 100m
Pulse With (seconds)
1
100k
1M
10M 100M
1G
Frequency (Hz)
Note:
(1) Insulating material is unnecessary between flange and resistors, flange and resistor are separated by alumina
substrate.
(2) At surface mount soldering, temperature profile in flange shall not exceed 220C.
(3) At screw mounting, using heat conduction grease on surface of flange is recommended.
(4) Heat resistance between resistor and flange is 3.3 C/W. Heat design will be done, as resistor temperature shall be
under 155 deg C in operation.
(5) 0.1% tolerance 5ppm TCR resistors and over 220ohm resistance are available, please call factory.
(6) Please note, terminal material is Tin plated copper, but inside of resistor contains Pb-Ag high melting solder that is
exempted by RoHS directive 2002/95/EC.
DataSheet4U(7.c) oTmube packaging material, Polystyrene/Polyethylene is also with RoHS compliance.
20060305
DataSheet4 U .com
|
PDF 파일 내의 페이지 : 총 2 페이지
제조업체: Nikkohm
( nikkohm )
RNP-20SxxxxZ00 data
데이터시트 다운로드 :
[ RNP-20SxxxxZ00.PDF ]
[ RNP-20SxxxxZ00 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
