RNP-10 반도체 회로 부품 판매점
TO220 20W HIGH POWER RESISTORS
|
|
 DB Lectro |
www.DataSheet4U.com
POWER SOLUTION - DBL
TO220 20W HIGH POWER RESISTORS
RNP-10
Lead Free
Features and Applications
20W high power resistors in TO220 style molded package for through-hole (20W) and surface mount
(10W).
Non-inductive design suits high frequency applications and high-speed pulse circuits.
Low, 5.9 C/W heat resistance from resistor hot spot to flange is presented by thin film metallization
technology.
Wide 100 mOhm to 220 Ohm resistance range, non-inductive impedance characteristic and heat
venting through the insulated metal tab aid circuit designers.
Small size and thin profile suit high-density compact installations.
Complete thermal conduction, heat dissipation design and vibration durable design also available.
Applications for SW PS, power unit of machines, motor control, drive circuits, automotive,
measurements, and industrial computers.DataSheet4U.com
DataShee
Dimensions (mm)
Type 000
A
C dia. M
D
Type 010
A
C dia. M
D
100
CF 3Y
J
G
F
B
LK
E
HN
100
CF 3Y
J
G
F
B
LK
HN
E
Type
A
B
CD
E
F
GH
J
K
L
MN
000 10.6 15.0 4.5 1.5 2.7 5.08 0.75 0.5 1.5 19.0 2.7 3.6 15.0
010 10.6 15.0 4.5 1.5 2.7 5.08 0.75 0.5 1.5 14.0 2.7 3.6 2.0
Ordering Information
Designation
Type
RNP-10C221F000
RNP-10
RNP-10C221F000
RNP-10
RNP-10C101F010
RNP-10
RNP-10C101F010
RNP-10
RNP-10AR1J000
RNP-10
RNP-10C500F000
RNP-10
TC
C(50ppm)
C(50ppm)
C(50ppm)
C(50ppm)
A(100ppm)
C(50ppm)
Resistance(1)
220 ohm
220 ohm
100 ohm
100 ohm
0.1 ohm
50 ohm
Tolerance
F(1%)
F(1%)
F(1%)
F(1%)
J(5%)
F(1%)
Note: (1) When order, additional ohmic resistance notation is recommended.
DataSheet4U.com
Code
000 (through-hole)
Z00 (Lead-free, through-hole)
010 (smd)
Z10 (Lead-free, smd)
000 (through-hole)
010 (smd)
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
DataSheet4 U .com
www.DataSheet4U.com
POWER SOLUTION - DBL
Lead Free
20W HIGH POWER RESISTORS
RNP-10
Specifications
Items
Rating Power
Rating Power
Heat Resistance
Resistance Range
Nominal Resistance
TCR (ppm/ )
Tolerance
Operation Temp. Range
Max. Operating Volt.
Withstanding Volt.
Load Life
Humidity
Temp. Cycle
Soldering Heat
Solder ability
Insulation Resistance
Vibration
Specification-Performance
20 Watt
1 Watt
5.9 C/W
0.01-0.91ohm 0.1-9.1ohm
10-220ohm
E6 E24 E24
250(H)
100 (A)
50 (C)
5%(J)
5% (J)
+/-1% (F)
-55 to+155
500V or P ⋅ R
DC2000 Volt
+/-(1.0 %+0.05 ohm)
+/- (1.0 %+0.05 ohm)
+/- (0.25 %+0.05 ohm)
+/- (0.1 %+0.05 ohm)
Over 95% of surface
Over 1,000 Meg ohm
+/- (0.25 %+0.05 ohm)
Test Conditions
-55 to 25 C flange temperature
Free air.
Hot spot to flange
220-51k ohm are available, see Note
Include 2.5 and 5.0
-55 to +155 C
60 seconds. Actually 2000VAC
25C, 90min .ON,30min .OFF,1000hours.
40C, 90-95%RH, DC 0.1W, 1000 hours.
-55 C,30 min.,+155 C,30 min., 5cycles
350+/-5 C, 3seconds,
230+/-5 C, 3seconds.
Between terminals and tab.
Note: At resistance from 220 to 51kohms rating power shall be restricted in 10W.
Derating
Power(W)
et4U.com
20
15
10
5
0
-50
+25C
0 50
Temperature Rise
(C)
140
RNP10C500 F
120
DataSheet4U.com100 Hot spot temperature on resistor based
80 referenced from flange temperature.
60
40
+155C
100 150
200
Flange Temperature (C)
20
0
0
10 20
Power (Watt)
Pulse Energy Durability
Pulse Peak Watt (Watts), one time rectangular impulse.
10K
RNP-10C100F
Frequency Characteristics
Impedance (ohm)
10K
RNP-10 C10K0F
RNP-10 C1K0F
1K 1K
RNP-10 C101F
100 100
RNP-10 C500F
RNP-10 C220F
10
1µ
10µ
100µ
1m
10m 100m
Pulse With (seconds)
10
10k 100k 1M 10M 100M 1G
Frequency (Hz)
Note:
(1) Insulating material is unnecessary between flange and resistors, flange and resistor is separated by alumina
substrate.
(2) At surface mount soldering, temperature profile in Flange shall not exceed 220C.
(3) Using heat conduction grease on surface of flange is recommended.
(4) Heat resistance between resistor and flange is 5.9 C/W. Heat design will be done, as resistor temperature shall be
under 155C in operation.
DataSheet4U(5.)co0m.1% tolerance resistors and over 220ohm resistance are available, please call factory.
20041001
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
DataSheet4 U .com
|
PDF 파일 내의 페이지 : 총 2 페이지
제조업체: DB Lectro
( dbl )
RNP-10 data
데이터시트 다운로드 :
[ RNP-10.PDF ]
[ RNP-10 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
RNP-10
TO220 20W HIGH POWER RESISTORS - DB Lectro
RNP-10S
TO126 20W HIGH POWER RESISTORS - DB Lectro