HIF3BC-xxx 반도체 회로 부품 판매점
(HIF3B Series) Ribbon Cable Connectot Compliant
|
|
 Hirose Electric |
Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
sFeatures
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1 The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2 The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9±0.1mm).
sProduct Specifications
Rating
Rated Current : 1A
Operating Temperature Range : –55~+85ç (Note 1) Storage Temperature Range : –10~+60ç (Note 2)
Rated Voltage : 200V AC Operating Moisture Range : 40~80%
Storage Humidity Range : 40~70% (Note 2)
Item Specification
Condition
1. Insulation Resistance 1000Mø min.
Measured at 500V DC
2. Withstand voltage
Neither short or breakdown
650V AC rms for 1 minute
3. Contact Resistance 15mø max.
Measured at 0.1A
4. Vibration
Electrical discontinuity, 1µS max.
10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours
5. Moisture Resistance Insulation resistance: 1000Mø min.
6. Temperature Cycle No defect such as crack or split occurs
Exposed to temperature 40±2ç and humidity 90~95% for 96 hours
(-65ç: 30 minutes ➝ 15~35ç: 5 minutes max.
125ç: 30 minutes ➝ 15~35ç: 5 minutes max.) 5 cycles
7. Operating Life
Contact resistance: 15mø max.
500 cycles
8. Resistance to Soldering heat No resin area fusion to degrade performance
Automatic soldering: 260ç for 10 seconds
Manual soldering: Soldering iron temperature: 300ç for 3 seconds
Note 1: Temperature rise is included when energized.
Note 2: This storage indicates a long-term storage state for the unused product before the board mounted.
The operating temperature and moisture ranges are applied to the non-energized state after the connector has been installed
to the board.
mNote 3: The above standards represent this series. Individual formal agreement should be based on the "Delivery Specification".
.cosMaterial
uPart
t4Insulator
sheeSocket Contact
www.dataPin header contact
D
DA
Material
PBT
Beryllium copper
Copper alloy
Brass
Finish
Black
Connection area
Gold plating
Connection area
Gold plating
Connection area
Gold plating
Connection area
Solder plating
Selective gold plating
Remarks
UL94V-0
–––––––
–––––––
B15
sOrdering Information
Please determine the specific product. If needed, select and order the product from the product No. as listed on catalog
pages B17~B32.
qSocket
HIF 3B - π D A - 2.54 R
qw
ert
yu
q Series Name : HIF
w Series No.
: 3B, 3BA, 3BB (50, 60, 64 contacts only)
e Number of contacts : 16, 20, 26, 30, 34, 40, 50, 60, 64
r Contact alignment : D : Double
tA
: VA type
y Contact pitch : 2.54mm
u Connection type
R : ID type
qPin Header
HIF 3B - π P A - 2.54 DS
qw
e rt
yu
q Series Name : HIF
w Series No. :
3B : (14 contacts not included) 3BC: (10 contacts only)
3BA, 3BB: (50, 60, 64 contacts only) 3BD: (10 contacts only)
e Number of contacts : 16, 20, 26, 30, 34, 40, 50, 60, 64
rP
: Pin header
tA
: Selective gold plating
y Contact pitch : 2.54mm
u Contact style
DS : Right angle type
DSA
: Straight type
B16
|
PDF 파일 내의 페이지 : 총 15 페이지
제조업체: Hirose Electric
( hirose )
HIF3BC-xxx data
데이터시트 다운로드 :
[ HIF3BC-xxx.PDF ]
[ HIF3BC-xxx 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
