|
Hirose Electric |
Coil Components (SMD)
MC-200SC and MC-200SD Series
sFeatures
MC-201SC
MC-201SD
MC-212SC
MC-217SC MC-218SC
MC-211SD
MC-212SD
MC-213SD
1.Excellent High Frequency Characteristics
Insertion loss: 0.6 dB TYP.
Phase balance: ±3deg TYP.
2.Highly Reliable Design
PPS resin is used for the exterior cladding of the
cover, glass epoxy substrate is used for the board
material, and solder plating is used for the electrodes.
All these factors contribute to excellent mechanical
strength, heat resistance, and soldering qualities
sProduct Specifications
3.Suited to Automatic Mounting
Embossed tape packaging permits automatic mounting.
(Individual delivery can also be accommodated.)
Ratings
Frequency range (Note)
Characteristic impedance (Note)
Maximum Input Power
30 to 370 MHz
50 ohms, 75 ohms
0.5 W
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Note: The frequency range and the characteristic impedance will differ depending on the products.
Item
Standard
Conditions
1.Vibration
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 4 hours in each of 3 directions
2.Shock
3.Temperature cycle
No damage, cracks, or parts dislocation
Acceleration of 294 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis
(-60 to 55ç: 30 min. ¡ 20 to 35ç: 15 min.
¡ 125 to 128ç: 30 min. ¡ 20 to 35ç: 15 min.)
for 100 cycles
4.Corrosion resistance
No serious corrosion
qThe test method conforms to MIL-STD-202.
Exposed to 5% salt water solution for 48 hours
sMaterials
sExternal Dimensions
Part
Board
Cover
Material
Glass epoxy
PPS
Finish
Solder plating
-----------
sOrdering Information
MC - 2 0 1 S C
1 2345 6
1 Series Name: MC
4 Suffix
2 Number of Divisions
5 Board Mounting Method
Indicated by number of divisions of output. S : SMT type
3 Phase Difference
6 Characteristic Impedance
Indicated by phase difference of output. C : 75 ohms
0 : 0°
D : 50 ohms
1 : 90°
input
qThe contact numbers
are common for both the
0° type and the 90° type.
46
sSpecifications
Frequency Phase π above 3dB
Part Number Range Difference Insertion Loss
(MHZ) (deg)
(dB Max)
Isolation
(dB Min)
V.S.W.R.
(Max)
Balance
Phase Amplitude
(deg)
(dB)
Impedance
(ohms)
Weight
(g)
MC-201SC 030~200
0
0.6
20
1.3 ±3 ±0.1
75
1
MC-212SC 050~095 – 90
0.6
20
1.2 ±3 ±0.5
75
1
MC-217SC 045~070 – 90
0.6
20
1.2 ±3 ±0.5
75
1
MC-218SC 070~100 – 90
0.6
20
1.2 ±3 ±0.5
75
1
MC-201SD 030~230
0
0.6
20
1.3 ±3 ±0.15
50
1
MC-211SD 170~230 – 90
0.6
20
1.2 ±3 ±0.5
50
1
MC-212SD 045~104 – 90
0.6
20
1.2 ±3 ±0.5
50
1
MC-213SD 330~370 – 90
1.3
16
1.4 ±4 ±0.5
50
1
Note 1: The insertion loss of the 2-way 90° type is the average output of the 0° port and the -90° port minus 3 dB coupling.
Note 2: When ordering items with embossed tape packaging, affix (06) to the end of the product number. One reel contains 500 pieces.
sFunction Diagram
sPCB Mounting Pattern
Pins 2, 3, 4, 5, and 6 are ground.
Pins 3, 4, 7, and 8 are ground.
sPrecautions
1.Soldering
(1)Recommended temperature profile
qPlease apply resist processing to the area around the
electrode pads.
(2)Recommended manual soldering
(3)Recommended screen thickness
2.Product Storage
Preheating
40 to 120 s
Soldering
20 to 60 s
Slow cooling
Natural cooling
for 1 minute Min.
Note 1: Up to 2 cycles of reflow soldering are possible under the same conditions,
provided that there is a return to normal temperature between the first and second
cycle.
Note 2: The temperature profile indicates the board surface temperature at the
point of contacts with the connector terminals (for surface mounted receptacle).
Manual soldering: 260ç for 10 seconds
0.15 mm
1After opening the package reseal promptly or store in a desiccator with a
desiccant.
2Store in a place that is not exposed to harmful gases which include sulfur or
chlorine, etc.
3Use within one year of delivery.
47
|