|
NXP Semiconductors |
TEA1532(A)P; TEA1532(A)T
GreenChip™II SMPS control IC
Rev. 02 — 4 February 2005
Product data sheet
1. General description
The GreenChip™II is the second generation of green Switched Mode Power Supply
(SMPS) controller ICs. Its high level of integration allows the design of a cost effective
power supply with a very low number of external components.
The TEA1532(A)P; TEA1532(A)T can also be used in fixed frequency, Continuous
Conduction Mode (CCM) converter designs for low voltage, high current applications. At
low power (standby) levels, the system operates in cycle skipping mode which minimizes
the switching losses during standby.
The special built-in green functions allow the efficiency to be optimum at all power levels.
This holds for quasi-resonant operation at high power levels, as well as fixed frequency
operation with valley switching at medium power levels. At low power (standby) levels, the
system operates in cycle skipping mode with valley detection.
The proprietary high voltage BCD800 process makes direct start-up possible from the
rectified universal mains voltage in an effective and green way. A second low voltage
BICMOS IC is used for accurate, high speed protection functions and control.
The TEA1532(A)P; TEA1532(A)T enables highly efficient and reliable supplies to be
designed easily.
2. Features
2.1 Distinctive features
s Universal mains supply operation (70 V to 276 V AC)
s High level of integration, resulting in a very low external component count
s Fixed frequency Continuous Conduction Mode (CCM) operation capability
s Quasi-Resonant (QR) Discontinuous Conduction Mode (DCM) operation capability.
2.2 Green features
s Valley or zero voltage switching for minimum switching losses in QR operation
s Cycle skipping mode at very low loads; input power < 300 mW at no-load operation for
a typical adapter application
s On-chip start-up current source.
2.3 Protection features
s Safe restart mode for system fault conditions
s Zero current switch-on in QR mode
Philips Semiconductors
TEA1532(A)P; TEA1532(A)T
GreenChip™II SMPS control IC
s Undervoltage protection (foldback during overload)
s IC OverTemperature Protection (OTP) (latched)
s Low and adjustable OverCurrent Protection (OCP) trip level
s Soft (re)start
s Mains voltage-dependent operation-enabling level
s TEA1532AP and TEA1532AT: General purpose input for latched or safe restart
protection and timing, e.g. to be used for overvoltage protection (OVP), output
short-circuit protection or system OTP.
s TEA1532P and TEA1532T: General purpose input for latched protection and timing,
e.g. to be used for OVP, output short-circuit protection or system OTP.
s Brown-out protection.
3. Applications
s Printer adapters and chargers. The device can also be used in all applications that
demand an efficient and cost-effective solution up to 250 W.
4. Ordering information
Table 1: Ordering information
Type number Package
Name
Description
TEA1532T
TEA1532AT
SO8
plastic small outline package; 8 leads; body
width 3.9 mm
TEA1532P
DIP8
plastic dual in-line package; 8 leads (300 mil)
TEA1532AP
Version
SOT96-1
SOT97-1
9397 750 14319
Product data sheet
Rev. 02 — 4 February 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
2 of 27
|