|
SEC |
SS1365
Unipolar Hall Switch-Low Sensitivity
Packages
3 pin SOT23 (suffix SO)
3 pin SIP (suffix UA)
Features and Benefits
– 3.5V to 24V Operation
– -40°C to 150°C Superior temperature operation
– CMOS technology
– Low current consumption
– Chopper-stabilized amplifier stage
– Open drain output
– Low sensitivity
– Small Size SOT23 3L or SIP 3L
both RoHS compliant packages
Functional Block Diagram
Application Examples
VDD
Voltage
Regulator
Chopper
OUT
– Automotive, Consumer and Industrial
– Solid-state switch
– Brushless DC motor commutation
– Speed detection
– Angular position detection
– Proximity detection
– Current detector
Hall
Plate
GND
SIP Package
Pin 1 – VDD
Pin 2 – GND
Pin 3 – OUT
SOT Package
Pin 1 – VDD
Pin 2 – OUT
Pin 3 – GND
General Description
The SS1365 is a unipolar Hall-effect sensor IC
fabricated from CMOS technology. The device
integrates a voltage regulator, Hall sensor with dynamic
offset cancellation system, small signal amplifier,
Schmitt trigger and an open-drain output driver. With
suitable output pull up, they can be used with bipolar or
CMOS logic circuits.
These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to
operate continuously over extended temperatures to +150°C, and are more stable with both temperature and supply
voltage changes. The unipolar switching characteristic makes these devices ideal for use with a simple bar or rod
magnet.
Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in
automotive, industrial and consumer applications.
The device is delivered in a Small Outline Transistor (SOT) and in a Plastic Single In Line ( SIP 3L flat). Both
3-lead packages are RoHS compliant.
1 V3.10 Nov 1, 2013
SS1365
Unipolar Hall Switch-Low Sensitivity
Glossary of Terms
MilliTesla (mT), Gauss
RoHS
Operating Point (BOP)
Release Point (BRP)
Units of magnetic flux density: 1mT = 10 Gauss
Restriction of Hazardous Substances
Magnetic flux density applied on the branded side of the package which turns the
output
driver ON (VOUT = VDSon)
Magnetic flux density applied on the branded side of the package which turns the
output
driver OFF (VOUT = high)
Pin Definitions and Descriptions
SOT Pin №
1
2
3
SIP Pin №
1
3
2
Name
VDD
OUT
GND
Type
Supply
Output
Ground
Function
Supply Voltage pin
Open Drain Output pin
Ground pin
Absolute Maximum Ratings
Parameter
Supply Voltage
Supply Current
Output Voltage
Output Current
Storage Temperature Range
Symbol
VDD
IDD
VOUT
IOUT
TS
Value
28
50
28
50
-65 to 170
Units
V
mA
V
mA
°C
Operating Temperature Range Symbol
Value
Units
Temperature Suffix “E”
Temperature Suffix “K”
Temperature Suffix “L”
TA
-40 to 85
°C
TA
-40 to 125
°C
TA
-40 to 150
°C
Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum-rated conditions for extended
periods may affect device reliability.
2 V3.10 Nov 1, 2013
|