|
Murata Manufacturing |
www.murata-ps.com
www.DataSheet4U.com
UEI Series
50-60W Isolated Wide-Range DC/DC Converters
Featuring a full 50-60 Watt output in 2.9 square inches of board area,
the UEI series isolated DC/DC converter family offers efficient
regulated DC power for printed circuit board mounting.
Typical unit
FEATURES
Small footprint DC/DC converter, ideal for high
current applications
Industry standard 1.50˝ x 1.90˝ x 0.38˝ open
frame package and pinout
Wide range input voltages 9-36 and 18-75Vdc
Assembly and attachment for RoHS standards
Isolation up to 2250 VDC (basic)
Up to 50-60W total output power with
overtemperature shutdown
High efficiency synchronous rectifier forward
topology
Stable no-lead operation with no required
external components
–40 to +85°C temperature range with derating
Designed to meet UL60950-1, CSA-C22.2 No.
234, EN60950-1 safety approvals
Extensive self-protection shut down features
RoHS6 compliant
PRODUCT OVERVIEW
Wide range 4:1 inputs on the 1.50" x 1.90" x
0.38" converter are either 9 to 36 Volts DC (Q12
models) or 18 to 75 Volts DC (Q48 models), ideal
for battery-powered and telecom equipment.
Fixed output voltages from 3.3 VDC to 15 VDC are
regulated to within ±0.05% and may be trimmed
within ±10% of nominal output. Applications
include small instruments, computer-based
systems, data communications equipment, remote
sensor systems, vehicle and portable electronics.
The UEI 50-60W Series includes full magnetic
and optical isolation up to 2250 Volts DC (basic
insulation). For connection to digital systems, the
outputs offer fast settling to current step loads
and tolerance of higher capacitive loads. Excellent
ripple and noise specifications assure compatibil-
ity to circuits using CPU’s, ASIC’s, programmable
logic and FPGA’s. No minimum load is required.
For systems requiring controlled startup/shut-
down, an external switch, transistor or digital logic
may be used to activate the remote On/Off control.
Remote Sense inputs compensate for resistive line
drops at high currents.
A wealth of self-protection features avoid both
converter and external circuit problems. These
include input undervoltage lockout, input overvolt-
age and overtemperature shutdown. The outputs
current limit using the “hiccup” autorestart
technique and the outputs may be short-circuited
indefinitely. Additional features include output
overvoltage and reverse conduction elimination.
The synchronous rectifier forward topology
offers high efficiency for minimal heat buildup
and “no fan” operation. The open frame design is
also available under special quantity order with
an encapsulation shell and thermally-conductive
potting compound. This option offers additional
cooling in low-airflow, high temperature applica-
tions.
SIMPLIFIED SCHEMATIC
For full details go to
www.murata-ps.com/rohs
+VIN
–VIN
On/Off
Control
Control
Typical topology is shown.
GATE
DRIVE
ISOLATION
BARRIER
OPTO
ISOLATION
Reference, trim &
Error Amplifier
+VOUT
–VOUT
+SENSE
TRIM
–SENSE
www.murata-ps.com
MDC_UEI Series 50-60W.B24 Page 1 of 12
www.DataSheet4U.com
UEI Series
50-60W Isolated Wide-Range DC/DC Converters
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE
Root Modelc
Output
Input
VOUT
(V)
IOUT
(A)
Power
(W)
R/N (mVp-p) Regulation (Max.) VIN
Nom.
Typ. Max. Line Load (V)
Range
(V)
IIN,
no load
(mA)
IIN, full
load (A)
Efficiency
Min. Typ.
UEI-3.3/15-Q12PR-C 3.3 15.0 49.5 15 30 ±0.05% ±0.06% 24 9-36 130
2.33 86.8% 88.5%
UEI-3.3/18-Q48NR-C 3.3 18.0 59.4 60 125 ±0.075% ±0.2% 48 18-75 130
1.38 87% 89.5%
UEI-5/10-Q12PR-C
5 10.0 50.0 35 50 ±0.1% ±0.1% 24 9-36 130
2.31 89% 90%
UEI-5/12-Q48NR-C
5 12.0 60.0 70 100 ±0.1% ±0.15% 48 18-75 130
1.37 89.5% 91%
UEI-12/4.2-Q12P-C 12 4.2 50.4 50 120 ±0.05% ±0.05% 24 9-36 130
2.35 87.8% 89.5%
UEI-12/5-Q48N-C
12 5.0 60.0 40 70 ±0.05% ±0.05% 48 18-75 130
1.42 87% 89.8%
UEI-15/3.3-Q12P-C 15 3.3 49.5 30 100 ±0.075% ±0.05% 24 9-36 130
2.29 88.3% 90%
UEI-15/4-Q48N-C
15 4.0 60.0
Please contact Murata Power Solutions for further information.
Package
Case (inches) Pinout
1.50x1.90x0.38
1.50x1.90x0.38
1.50x1.90x0.38
1.50x1.90x0.38
1.50x1.90x0.38
1.50x1.90x0.38
1.50x1.90x0.38
P52
P52
P52
P52
P52
P52
P52
c These are partial model numbers. Please refer to the full model number structure for complete
ordering part numbers.
d Sense input is not included for 12 VOUT and higher models. Sense is optional for 5 VOUT and lower.
e All specifications are typical at nominal line voltage and full load, +25 deg.C. unless otherwise
noted. See detailed specifications.
f Output capacitors are 1 μF ceramic || 10 μF electrolytic. Input cap is 22 μF, low ESR.
g I/O caps are necessary for our test equipment and may not be needed for your application.
PART NUMBER STRUCTURE
UEI - 3.3 / 15 - Q12 P R Z - C
Nominal Output Voltage
RoHS6 Hazardous Substance Compliance
(does not claim EU RoHS exemption 7b–lead in solder)
Maximum Rated Output
Current in Amps
Plastic Case:
Blank = Open frame (no case)
Z = Plastic case, optional*
Input Voltage Range:
Q12 = 9-36V
Q48 = 18-75V
Sense Inputs (5 VOUT and lower):
R = Sense included as standard (for 5 VOUT
and lower models only. 12 VOUT and higher
models do not offer the sense option.)
On/Off Control Polarity:
P = Positive
Blank = Sense not installed for 5 VOUT and
lower models. Pins 6 and 9 omitted.
N = Negative
Positive “P” polarity is standard for Q12 models and optional special
order for Q48 models. Negative “N” polarity is standard for Q48
models and optional special order for Q12 models.
* Please contact Murata Power Solutions
for availability on the plastic case models.
Note:
Not all model number combinations are
available. Contact Murata Power Solutions.
Soldering Guidelines
Murata Power Solutions recommends the specifications below when installing these converters. These specifications vary depending on the solder type. Exceeding these specifica-
tions may cause damage to the product. Be cautious when there is high atmospheric humidity. We strongly recommend a mild pre-bake (100° C. for 30 minutes). Your production
environment may differ; therefore please thoroughly review these guidelines with your process engineers.
Wave Solder Operations for through-hole mounted products (THMT)
For Sn/Ag/Cu based solders:
For Sn/Pb based solders:
Maximum Preheat Temperature 115° C. Maximum Preheat Temperature 105° C.
Maximum Pot Temperature
270° C. Maximum Pot Temperature
250° C.
Maximum Solder Dwell Time 7 seconds Maximum Solder Dwell Time 6 seconds
www.murata-ps.com
MDC_UEI Series 50-60W.B24 Page 2 of 12
|