|
Burr-Brown Corporation |
www.DataSheet4U.com
BurrĆBrown Products
from Texas Instruments
DAC8551
SLAS429A – APRIL 2005 – REVISED JULY 2005
16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT
DIGITAL-TO-ANALOG CONVERTER
FEATURES
DESCRIPTION
• 16-Bit Monotonic Over Temperature
• Relative Accuracy: 8 LSB (Max)
• Glitch Energy: 0.1 nV-s
• Settling Time: 10 µs to ±0.003% FSR
• Power Supply: +2.7 V to +5.5 V
• MicroPower Operation: 200 µA at 5 V
• Rail-to-Rail Output Amplifier
• Power-On Reset to Zero
• Power-Down Capability
• Schmitt-Triggered Digital Inputs
• SYNC Interrupt Facility
• Drop-In Compatible With DAC8531/01
• Operating Temperature Range: -40°C to 105°C
The DAC8551 is a small, low-power, voltage output,
16-bit digital-to-analog converter (DAC). It is
monotonic, provides good linearity, and minimizes
undesired code-to-code transient voltages. The
DAC8551 uses a versatile 3-wire serial interface that
operates at clock rates to 30 MHz and is compatible
with standard SPI™, QSPI™, Microwire™, and digital
signal processor (DSP) interfaces.
The DAC8551 requires an external reference voltage
to set its output range. The DAC8551 incorporates a
power-on-reset circuit that ensures the DAC output
powers up at 0 V and remains there until a valid write
takes place to the device. The DAC8551 contains a
power-down feature, accessed over the serial
interface, that reduces the current consumption of the
device to 200 nA at 5 V.
• Available Package:
– 3 mm × 5 mm MSOP-8
APPLICATIONS
• Process Control
The low-power consumption of this device in normal
operation makes it ideally suited for portable battery-
operated equipment. The power consumption is
1.00 mW at 5 V, reducing to 1 µW in power-down
DataSheet4mU.ocdoem.
• Data Acquisition Systems
The DAC8551 is available in an MSOP-8 package.
• Closed-Loop Servo-Control
• PC Peripherals
• Portable Instrumentation
• Programmable Attenuation
FUNCTIONAL BLOCK DIAGRAM
VDD
VFB
DataShee
VREF
Ref (+)
16−Bit DAC
VOUT
16
DAC Register
SYNC
SCLK
DIN
16
Shift Register
PWD Control
Resistor
Network
GND
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI, QSPI are trademarks of Motorola.
DataSheet4UM.iccroomwire is a trademark of National Semiconductor.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005, Texas Instruments Incorporated
www.DataSheet4U.com
DAC8551
SLAS429A – APRIL 2005 – REVISED JULY 2005
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated
circuits be handled with appropriate precautions. Failure to observe proper handling and installation
procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
PRODUCT
MINIMUM
RELATIVE
ACCURACY
(LSB)
DIFFERENTIAL
NONLINEARITY
(LSB)
PACKAGING/ORDERING INFORMATION
PACKAGE
LEAD
PACKAGE
DESIGNATOR (1)
SPECIFICATION
TEMPERATURE
RANGE
PACKAGE
MARKING
DAC8551I
±8
±1 MSOP-8
DGK
–40°C TO 105°C
D81
(1) For the most current specifications and package information, refer to our web site at www.ti.com.
ORDERING
NUMBER
DAC8551IDGK
DAC8551IDGKT
DAC8551IDGKR
TRANSPORT
MEDIA,
QUANTITY
Tube, 80
Tape and Reel, 250
Tape and Reel, 2500
et4U.com
ABSOLUTE MAXIMUM RATINGS(1)
VDD to GND
Digital input voltage to GND
VOUT to GND
Operating temperature range
Storage temperature range
Junction temperature range (TJ max)
Power dissipation (DGK)
θJA Thermal impedance
θJC Thermal impedance
Lead temperature, soldering
Vapor phase (60 s)
Infrared (15 s)
DataSheet4U.com
UNIT
–0.3 V to 6 V
–0.3 V to +VDD + 0.3 V
–0.3 V to +VDD + 0.3 V
–40°C to 105°C
–65°C to 150°C
150°C
(TJmax – TA)/θJA
206°C/W
44°C/W
215°C
220°C
(1) Stresses above those listed under absolute maximum ratings may cause permanent damage to the device. Exposure to absolute
maximum conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
VDD = 2.7 V to 5.5 V,– 40°C to 105°C range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
STATIC PERFORMANCE(1)
Resolution
Relative accuracy
Measured by line passing through codes 485 and 64741
Differential nonlinearity
16-bit Monotonic
Zero-code error
Full-scale error
Measured by line passing through codes 485 and 64741.
Gain error
Zero-code error drift
Gain temperature coefficient
Power supply rejection ratio
(PSRR)
RL = 2 kΩ, CL = 200 pF
MIN TYP MAX
UNIT
16 Bits
±3 ±8
LSB
±0.25
±1
LSB
±2 ±12
mV
±0.05 ±0.5 % of FSR
±0.02 ±0.15 % of FSR
±5 µV/°C
±1 ppm of FSR/°C
8 mV
0.75 mV/V
DataShee
DataSheet4U(1.)coLminearity calculated using a reduced code range of 485 to 64741; output unloaded.
2
|