|
NXP Semiconductors |
INTEGRATED CIRCUITS
DATA SHEET
TEA1200TS
0.95 V starting DC-to-DC converter
with low battery indicator
Product specification
2002 May 14
Philips Semiconductors
0.95 V starting DC-to-DC converter
with low battery indicator
Product specification
TEA1200TS
FEATURES
• Complete DC-to-DC converter circuit and battery low
detector
• Configurable for 1, 2 or 3-cell Nickel-Cadmium (NiCd) or
Nickel Metal Hydride (NiMH) batteries and 1 Lithium Ion
(Li-Ion) battery
• Guaranteed DC-to-DC converter start-up from 1-cell
NiCd or NiMH battery, even with a load current
• Upconversion or downconversion
• Internal power MOSFETs featuring a low RDSon of
approximately 0.1 Ω
• Synchronous rectification for high efficiency
• Soft start
• PWM-only operating option
• Stand-alone low battery detector requires no additional
supply voltage
• Low battery detection level at 0.90 V, externally
adjustable to a higher level
• Adjustable output voltages
• Shut-down function
• Small outline package
• 0.6 µm BICMOS process.
APPLICATIONS
• Cellular phones
• Cordless phones
• Personal Digital Assistants (PDAs)
• Portable audio players
• Pagers
• Mobile equipment.
GENERAL DESCRIPTION
The TEA1200TS is a fully integrated battery power unit
including a high-efficiency DC-to-DC converter which runs
from a 1-cell NiCd or NiMH battery and a low battery
detector. The circuit can be arranged in several ways to
optimize the application circuit of a power supply system.
Therefore, the DC-to-DC converter can be arranged for
upconversion or downconversion and the low battery
detector can be configured for several types of batteries.
Accurate low battery detection is possible while all other
blocks are switched off.
The DC-to-DC converter features efficient, compact and
dynamic power conversion using a digital control concept
comparable with Pulse Width Modulation (PWM) and
Pulse Frequency Modulation (PFM), integrated CMOS
power switches with a very low RDSon and fully
synchronous rectification.
The device operates at a switching frequency of 600 kHz
which enables the use of external components with
minimum size. The switching frequency can be
synchronized to an external high frequency clock signal.
Optionally, the device can be kept in PWM control mode
only. Deadlock is prevented by an on-chip undervoltage
lockout circuit.
Active current limiting enables efficient conversion in
pulsed-load systems such as Global System for Mobile
communication (GSM) and Digital Enhanced Cordless
Telecommunications (DECT).
The low battery detector has a built-in detection level
which is optimum for a 1-cell NiCd or NiMH battery.
ORDERING INFORMATION
TYPE
NUMBER
TEA1200TS
NAME
SSOP16
PACKAGE
DESCRIPTION
plastic shrink small outline package; 16 leads; body width 4.4 mm
VERSION
SOT369-1
2002 May 14
2
|