|
Supertex Inc |
Supertex inc.
HV3418
64-Channel Serial to Parallel Converter
With High Voltage
Push-Pull Outputs
Features
►►Processed with HVCMOS® technology
►►Output voltages to 180V
►►Low power level shifting
►►Shift register speed:
6.0MHz @ VDD = 5.0V
12MHz @ VDD = 12V
►►Latched data outputs
►►Output polarity and blanking
►►CMOS compatible inputs
►►Forward and reverse shifting options
General Description
The HV3418 is a low voltage serial to high voltage parallel
converter with push-pull outputs. This device has been designed
for use as a printer driver for inkjet applications. It can also be
used in any application requiring multiple output, high voltage,
low current sourcing and sinking capabilities.
The device consists of a 64-bit shift register, 64 latches, and
control logic to perform the polarity select and blanking of the
outputs. A DIR pin controls the direction of data shift through
the device. With DIR grounded, DIOA is Data-In and DIOB is
Data-Out; data is shifted from HVOUT64 to HVOUT1. When DIR
is at logic high, DIOB is Data-In and DIOA is Data-Out: data is
then shifted from HVOUT1 to HVOUT64. Data is shifted through
the shift register on the low to high transition of the clock. Data
output buffers are provided for cascading devices. Operation
of the shift register is not affected by the LE (latch enable), BL
(blanking), or the POL(polarity) inputs. Transfer of data from the
shift register to the latch occurs when the LE (latch enable) is
high. The data in the latch is stored during LE transition from
high to low.
Functional Block Diagram
POL
BL
LE
DIOA
CLK
64 bit
DIR
Static Shift
Register
64 Latches
DIOB
VPP
HVOUT1
HVOUT2
•
•
•
60 Additional
Outputs
•
•
•
HVOUT63
HVOUT64
Doc.# DSFP-HV3418
C071813
Supertex inc.
www.supertex.com
Ordering Information
Part Number
Package Option
HV3418PG-G
80-Lead PQFP
-G denotes a lead (Pb)-free / RoHS compliant package
Packing
66/Tray
Pin Configuration
HV3418
Absolute Maximum Ratings
Parameter
Value
Supply voltage, VDD
Output voltage, VPP
Logic input levels
Ground current 1
High voltage supply current 1
Continuous total power dissipation 2
-0.5V to +15V
VDD to +200V
-0.5V to VDD +0.5V
1.5A
1.3A
1200mW
Operating temperature range
-40°C to +85°C
Storage temperature range
-65°C to +150°C
Absolute Maximum Ratings are those values beyond which damage to the
device may occur. Functional operation under these conditions is not implied.
Continuous operation of the device at the absolute rating level may affect
device reliability. All voltages are referenced to GND.
Notes:
1. Connection to all power and ground pads is required. Duty cycle is
limited by the total power dissipated in the package.
2. For operation above 25°C ambiant derate linearly to maximum
operating temperature at 20mW/°C.
80
1
80-Lead PQFP
(top view)
Product Marking
HV3418PG
LLLLLLLLLL
YYWW
CCCCCCCC AAA
L = Lot Number
YY = Year Sealed
WW = Week Sealed
C = Country of Origin
A = Assembler ID
= “Green” Packaging
80-Lead PQFP
Package may or may not include the following marks: Si or
Typical Thermal Resistance
Package
θja
80-Lead PQFP
37OC/W
Recommended Operating Conditions
Sym Parameter
Min
VDD Logic supply voltage
VDD = 5.0V
VDD = 12V
VPP High voltage supply
VIH High-level input voltage
VIL Low-level input voltage
TA Operating free-air temperature
Power-up sequence should be the following:
1. Connect ground
2.
3.
ASpept layllVinDpD uts (Data, CLK, Enable, etc.) to a known state
4. Apply VPP
PoTwheeVr-PdP sohwounldsneotqduroepnbceelowshVoDDuoldr flboaet
during operation.
the reverse of
the
above.
4.5
10.8
60
VDD - 0.9
0
-40
Typ
5.0
12.0
-
-
-
-
Max
5.5
13.2
180
VDD
0.9
+85
Units
V
V
V
V
°C
Doc.# DSFP-HV3418
C071813
Supertex inc.
2 www.supertex.com
|