|
Supertex |
HV528
16-Channel Serial to Parallel Converter
with High Voltage Backplane Driver and Push-Pull Outputs
Features
► HVCMOS® technology
► Output voltage up to +200V
► Shift register speed 500kHz @ VDD = 1.7V
► 16 high voltage outputs
► High voltage backplane driver
► CMOS input levels
Applications
► Multiple segment EL display
► Piezoelectric transducer driver
► Braille driver
General Description
The HV528 is a 200V, 16-channel serial to parallel converter.
The high voltage outputs and the backplane driver are
designed to source and sink ±1.0mA.
The high voltage outputs are controlled by a 16-bit serial shift
register, followed by a 16-bit latch. Data is shifted through
the shift registers during the low to high clock transition. A
data output buffer is provided for cascading multiple devices.
Data is transferred to the 16-bit latch when a logic level low is
applied to the LE input. Data is stored in the latch when LE is
high. Output states are controlled by the data in the latch and
by the POL pin.
Typical Application Circuit
Low Voltage
Power Supply
High Voltage
VBIAS Power Supply
Micro
Processor
DIN
CLK
LE
POL
DOUT
HVOUT1
Low
Voltage
Shift
Register
Latches
High
Voltage
16 Level
Translators
&
Push-Pull
HVOUT16
Output
BP
Supertex HV528
to DIN of another HV528 for cascading (if needed)
EL
Segment
Panel
● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
Ordering Information
Package Option
Device
32-Lead QFN
5.00x5.00mm body
1.00mm height (max)
0.50mm pitch
HV528
HV528K6-G
-G indicates package is RoHS compliant (‘Green’)
Pin Configuration
32
1
HV528
Absolute Maximum Ratings
Parameter
Value
Logic supply, VDD
High voltage supply, VPP
Translator supply voltage, VBIAS
Logic input levels
Operating junction temperature
-0.5V to 7.0V
215V
-0.5V to 7.0V
-0.5V to VDD +0.5V
-40°C to +125°C
Storage temperature range
-65°C to +150°C
Absolute Maximum Ratings are those values beyond which damage to the
device may occur. Functional operation under these conditions is not implied.
Continuous operation of the device at the absolute rating level may affect
device reliability. All voltages are referenced to device ground.
32-Lead QFN (K6)
(top view)
(Bottom side exposed center pad is at VPP potential)
Product Marking
HV528
LLLLLL
YYWW
AAACCC
L = Lot Number
YY = Year Sealed
WW = Week Sealed
A = Assembler ID
C = Country of Origin
= “Green” Packaging
32-Lead QFN (K6)
Operating Supply Voltages and Conditions
Sym Parameter
Min Typ Max Units
VDD Logic supply voltage
1.7 3.0 5.5 V
VBIAS Level translator supply voltage
5.4 - 6.6 V
VPP Positive high voltage supply
50 - 200 V
VIH High-level input voltage
0.9VDD
- VDD V
VIL Low-level input voltage
0-
V
TA Operating temperature
0 - +70 °C
Notes:
1. External ground noise reduction circuit will be provided by design upon characterization.
Conditions
---
---
---
---
---
---
Power-up sequence should be the following*:
1. Apply ground
2. Apply VDD
3. Set all inputs (DIN, CLK, LE , POL) to a known state
4. Apply VBIAS
5. Apply VPP
Power-down sequence should be the reverse of the above
t*heThsiislicpoonwseurbusptrasteeq.uAefntecrearlel qouthireerssaignneaxlstearrneapl hoiwgehrveodl,tafigneishdioradiesinbgettwheeeVnPPVtDoD iatsndfinVaPlP.leWveitlh. out the diode, power up VPP to a VDD level first to bias
● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
2
|