MB95F168M 반도체 회로 부품 판매점
8-bit Microcontroller
|
|
 Fujitsu Media Devices |
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12609-3E
8-bit Microcontroller
CMOS
F2MC-8FX MB95160M Series
www.DataSheetM4U.comB95F168M/F168N/F168J/FV100D-103
■ DESCRIPTION
The MB95160M series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set,
the microcontrollers contain a variety of peripheral functions.
Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURE
• F2MC-8FX CPU core
Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instruction
• Bit manipulation instructions etc.
• Clock
• Main clock
• Main PLL clock
• Sub clock
• Sub PLL clock
(Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page
URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html
“Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system
development.
Copyright©2007 FUJITSU LIMITED All rights reserved
MB95160M Series
(Continued)
• Timer
• 8/16-bit compound timer × 2 channels
Can be used to interval timer, PWC timer, PWM timer and input capture.
• 8/16-bit PPG × 2 channels
• 16-bit PPG × 1 channel
• Time-base timer × 1 channel
• Watch prescaler × 1 channel
• LIN-UART × 1 channel
• LIN function, clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
www.DataSheet4U.c•omFull duplex double buffer
• UART/SIO × 1 channel
• Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
• Full duplex double buffer
• I2C* × 1 channel
Built-in wake-up function
• External interrupt × 8 channels
• Interrupt by edge detection (rising, falling, or both edges can be selected)
• Can be used to recover from low-power consumption (standby) modes.
• 8/10-bit A/D converter × 8 channels
8-bit or 10-bit resolution can be selected.
• LCD controller (LCDC)
• 32 SEG × 4 COM (Max 128 pixels)
• With blinking function
• Low-power consumption (standby) mode
• Stop mode
• Sleep mode
• Watch mode
• Time-base timer mode
• I/O port
• The number of maximum ports : Max 53
• Port configuration
- General-purpose I/O ports (N-ch open drain) : 2 ports
- General-purpose I/O ports (CMOS)
: 51 ports
• Programmable input voltage levels of port
Automotive input level / CMOS input level / hysteresis input level
• Flash memory security function
Protects the content of Flash memory
* : Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use, these
components in an I2C system provided that the system conforms to the I2C Standard Specification as defined
by Philips.
2
|
PDF 파일 내의 페이지 : 총 30 페이지
제조업체: Fujitsu Media Devices
( fujitsu )
MB95F168M controller
데이터시트 다운로드 :
[ MB95F168M.PDF ]
[ MB95F168M 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
MB95F168J
8-bit Microcontroller - Fujitsu Media Devices
MB95F168JA
8-bit Microcontrollers - Fujitsu
MB95F168M
8-bit Microcontroller - Fujitsu Media Devices
MB95F168MA
8-bit Microcontrollers - Fujitsu
MB95F168N
8-bit Microcontroller - Fujitsu Media Devices
MB95F168NA
8-bit Microcontrollers - Fujitsu