LTC1758-2EMS 반도체 회로 부품 판매점
RF Power Controllers with 250kHz Control Loop Bandwidth and 40dB Dynamic Range
|
|
 Linear Technology |
LTC1758-1/LTC1758-2
RF Power Controllers with
250kHz Control Loop Bandwidth and
40dB Dynamic Range
FEATURES
DESCRIPTIO
s Dual Band RF Power Amplifier Control (LTC1758-2)
s Internal Schottky Diode Detector with Improved
Dynamic Range vs LTC1757A
s Wide Input Frequency Range: 850MHz to 2GHz
s Autozero Loop Cancels Offset Errors and
Temperature Dependent Offsets
s Wide VIN Range: 2.7V to 6V
Allows Direct Connection to Battery
s RF Output Power Set by External DAC
s 250kHz Control Loop Bandwidth
s Fast Acquire After Transmit Enable
s Internal Frequency Compensation
s Rail-to-Rail Power Control Outputs
s Power Control Signal Overvoltage Protection
s Low Operating Current: 1mA
s Very Low Shutdown Current: < 1µA
s Available in 8-Pin MSOP (LTC1758-1)
and 10-Pin MSOP (LTC1758-2) Packages
s Pin Compatible with LTC1757A-X
s Improved Start Voltage Accuracy
s Improved PCTL Input Filtering
U
APPLICATIO S
s Single and Dual Band GSM/GPRS Cellular Telephones
s PCS Devices
s Wireless Data Modems
s U.S. TDMA Cellular Phones
The LTC®1758-2 is a dual band RF power controller for
RF power amplifiers operating in the 850MHz to 2GHz
range. The loop bandwidth reduction to 250kHz im-
proves frequency stability when controlling slow turn-on
PAs such as the Philips BGY280, Conexant RM009/
CX77302, Anadigics AWT6102/AWT6107 and the Hitachi
PF08107/PF08123B.
The LTC1758-1 is a single output RF power controller
that is identical in performance to the LTC1758-2 except
that one output (VPCA) is provided. The LTC1758-1 can
be used to drive a single RF or dual channel module with
integral multiplexer. This part is available in an 8-pin
MSOP package.
RF power is controlled by driving the RF amplifier power
control pins and sensing the resultant RF output power
via a directional coupler. The RF sense voltage is peak
detected using an on-chip Schottky diode. This detected
voltage is compared to the DAC voltage at the PCTL pin
to control the output power. The RF power amplifier is
protected against high supply current and high power
control pin voltages.
Internal and external offsets are cancelled over tempera-
ture by an autozero control loop, allowing accurate low
power programming. The shutdown feature disables the
part and reduces the supply current to < 1µA.
, LTC and LT are registered trademarks of Linear Technology Corporation.
TYPICAL APPLICATIO
LTC1758-2 Dual Band Cellular Telephone Transmitter
68Ω
VIN 33pF
LTC1758-2
1 10
VIN VCC
Li-Ion
2
RF
9
VPCA
38
SHDN
SHDN
VPCB
47
BSEL
BSEL
TXEN
TXEN
5
GND
6
PCTL
900MHz
RF PA
DIRECTIONAL
COUPLER
DIPLEXER
DAC
1.8GHz /1.9GHz
RF PA
50Ω
1758 TA01
1
LTC1758-1/LTC1758-2
ABSOLUTE AXI U RATI GS (Note 1)
VIN to GND ............................................... – 0.3V to 6.5V
VPCA, VPCB Voltage ..................................... – 0.3V to 3V
PCTL Voltage ............................... – 0.3V to (VIN + 0.3V)
RF Voltage ........................................ (VIN – 2.2V) to 7V
IVCC, Continuous ....................................................... 1A
IVCC, 12.5% Duty Cycle .......................................... 2.5A
SHDN, TXEN, BSEL
Voltage to GND ............................ – 0.3V to (VIN + 0.3V)
IVPCA/B, 25% Duty Cycle ...................................... 20mA
Operating Temperature Range (Note 2) . – 30°C to 85°C
Storage Temperature Range ................ – 65°C to 150°C
Maximum Junction Temperature ........................ 125°C
Lead Temperature (Soldering, 10 sec)................ 300°C
UW U
PACKAGE/ORDER I FOR ATIO
TOP VIEW
VIN 1
RF 2
SHDN 3
GND 4
8 VCC
7 VPCA
6 TXEN
5 PCTL
MS8 PACKAGE
8-LEAD PLASTIC MSOP
TJMAX = 125°C, θJA = 160°C/W
ORDER PART
NUMBER
LTC1758-1EMS8
MS8 PART MARKING
LTSL
Consult LTC Marketing for parts specified with wider operating temperature ranges.
VIN 1
RF 2
SHDN 3
BSEL 4
GND 5
TOP VIEW
10 VCC
9 VPCA
8 VPCB
7 TXEN
6 PCTL
MS10 PACKAGE
10-LEAD PLASTIC MSOP
TJMAX = 125°C, θJA = 160°C/W
ORDER PART
NUMBER
LTC1758-2EMS
MS10 PART MARKING
LTSM
ELECTRICAL CHARACTERISTICS The q denotes specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VIN = 3.6V, SHDN = TXEN = HI, unless otherwise noted.
PARAMETER
CONDITIONS
MIN TYP MAX UNITS
VIN Operating Voltage
IVIN Shutdown Current
IVIN Autozero Current
IVIN Operating Current
IVCC Current Limit
VIN to VCC Resistance
VPCA/B VOL
VPCA/B Dropout Voltage
VPCA/B Voltage Clamp
VPCA/B Output Current
VPCA/B Enable Time
VPCA/B Bandwidth
VPCA/B Load Capacitance
VPCA/B Slew Rate
VPCA/B Droop
VPCA/B TXEN Start Voltage
SHDN Input Threshold
TXEN, BSEL Input Threshold
SHDN = LO, TXEN = LO, BSEL = LO
SHDN = HI, TXEN = LO
SHDN = HI, TXEN = HI, IVPCA = IVPCB = 0mA, VPCA/B = HI
SHDN = LO, TXEN = LO
TXEN = HI, Open Loop, PCTL = –100mV
ILOAD = 5.5mA, VIN = 2.7V
RLOAD = 400Ω, PCTL = 2V, External Gain = 0.417
VPCA/B = 2.4V, VIN = 2.7V
VPCA/B = 2.6V, VIN = 3V
VPCTL = 2V Step, CLOAD = 100pF (Note 5)
CLOAD = 100pF, RLOAD = 400Ω (Note 8)
(Note 6)
VPCTL = 2V Step, CLOAD = 100pF (Note 3)
VIN = 2.7V, VPCTL = 2V Step
Open Loop, TXEN Low to High, CLOAD = 100pF (Note 9)
VIN = 2.7V to 6V, TXEN = LO
VIN = 2.7V to 6V
q 2.7
q
q
q
q
q 2.7
q 5.5
q6
q
q 180
q 0.75
500
q 0.35
q 0.35
6V
1 µA
1 1.6 mA
1.1 1.7 mA
2.2 A
90 150 mΩ
0 0.1
V
VIN – 0.28
2.85 3.0
V
V
9 mA
10 mA
620 1000
ns
250 330 kHz
100 pF
1.3 V/µs
±1 µV/ms
600 700 mV
1.4 V
1.4 V
2
|
PDF 파일 내의 페이지 : 총 16 페이지
제조업체: Linear Technology
( linear )
LTC1758-2EMS controller
데이터시트 다운로드 :
[ LTC1758-2EMS.PDF ]
[ LTC1758-2EMS 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
LTC1758-2EMS
RF Power Controllers with 250kHz Control Loop Bandwidth and 40dB Dynamic Range - Linear Technology
