FX4AH-32S-1.27SV 반도체 회로 부품 판매점
Stacking Height 5 to 11mm Half Pitch Connector
|
|
 Hirose Electric |
Stacking Height 5 to 11mm Half Pitch Connector
FX4 Series
Stacking Height Flexible
5 to 11mm
DIP type
6 to 11mm
SMT type
The mounting area 70% reduced, compared with
conventional product (FX2 series)
FX2 series
FX4 series
(Compared with 60 contacts)
sFeatures
The FX4 series is a miniature board to board connectors, where the stacking height can be set at the 1mm interval.
According to the mounting method, you can select the product from the through hole type and SMT type.
qThrough hole Type
1. Small and Light
The mounting space and weight is reduced about 30%,
compared to the conventional product (HRS FX2 series),
respectively, and the mounting area about 70% reduced,
compared to the conventional one.
2. Stacking Height 5 to 11mm
The board to board stacking height can be set per 1mm
from 5mm up to 11mm.
3. Flux Swell Prevention
When solder is dipped, the flux swell from the board rear
side is completely prevented.
4. Mis-insertion Prevention and Low
Insertion/Extraction Force Mechanism
The connection area is designed to completely prevent the
mis-insertion.
Moreover, the low insertion/extraction mechanism is
adopted.
qSMT Type
1. Small and Light
The mounting space and weight is reduced about 40%,
compared with the conventional product (HRS FX2 series),
and the mounting area is reduced 80%, compared to the
conventional one.
2. Stacking Height 6 to 11mm
The board to board stacking height can be set per 1mm
from 6mm up to 11mm. In addition, the height can be also
set in combination with the through hole type.
3. Mis-insertion Prevention and Low
Insertion/Extraction Structure
The connection area is designed to completely prevent the
mis-insertion.
Moreover, the low insertion/extraction force mechanism is
adopted.
4. Positioning Boss Selectable
According to the mounting condition, it is selected whether
or not the boss is required. Regarding the boss attached
type, the boss eccentric position can stabilize the mounting
direction.
sApplications
Computers, peripheral equipments, business equipments, etc.
A189
sProduct Specifications
Rating
Current rating 0.5A
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
Voltage rating 125V AC Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Item
Specification
Condition
1. Insulation Resistance 100M ohms min.
Measured at 250V PC
2. Withstanding Voltage No flashover or insulation breakdown.
300V AC for 1 minute
3. Resistance
45m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance : 55m ohms max.
(-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes
Insulation resistance : 100M ohms min.
(-85ç: 30 minutes 15 to 35ç: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance : 55m ohms max.
300 cycles
8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part
Insulator
Receptacle Contact
Header Contact
Material
Polyamide
Phosphor bronze
Finish
Beige
Selective gold plated
Selective gold plated
Remarks
UL94V-0
________
________
Note : The black dots on the insulater will not affect performance.
sOrdering Information
qDip Type
FX 4C 1 - 80 P - 1.27 DSA L
q we
r
q Series Name : FX
w Series No. : 4C
e Product Height Variable:None: Standard 1: +1mm
2: +2mm
3: +3mm
r Number of Contacts: 20, 32, 40, 52, 60, 68, 80
t y ui
t Connector Type P : Header
S : Receptacle
y Contact Pitch : 1.27mm
u Contact type DSA : Straight
i L: Board prefixed pin
qSMT Type
FX 4A H - 80 P - 1.27 SV
q we
rt
yu
q Series Name : FX
w Series No. : 4A : With boss
4B : Without boss
e Product Height Variable
H : +0.5mm
e (Ratio to dip type standard product) 2 : +2mm
r Number of Contacts : 20, 32, 40, 52, 60, 68, 80
t Connector Type P : Header
S : Receptacle
1 : +1mm y Contact Pitch : 1.27mm
3 : +3mm u Contact type SV : Vertical type
A190
|
PDF 파일 내의 페이지 : 총 17 페이지
제조업체: Hirose Electric
( hirose )
FX4AH-32S-1.27SV connector
데이터시트 다운로드 :
[ FX4AH-32S-1.27SV.PDF ]
[ FX4AH-32S-1.27SV 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
