DF9C-9P-1V 반도체 회로 부품 판매점
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
|
|
 Hirose |
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
DF9 Series
sFeatures
1. Compliant with the VESA FPDI-1 Standard Interface Connector
The 31 and 41 contact connectors comply with the standard connector specification for the flat panel display interface, which
U.S VESA. has selected as FPDI-1.
VESA: Video Electronics Standards Association
FPDI-1: Flat Panel Display Interface
2. Perfect Mis-insertion Prevention
The mating area is designed in a trapezoidal structure, and perfectly prevents the mis-insertion despite the miniature size.
3. Equipped with Easy Lock Mechanism
The easy lock mechanism assures the firm insertion and extraction properties as well as the insertion/extraction feeling touch.
4. Smooth Insertion and Extraction Feeling
The contact is constructed without the material fragible surface in the contact portion, and provides a smooth insertion and
use feeling.
5. Setting Two Type Platings as Standard
Two type platings, tin plated and gold plated, are prepared, and either appropriate plating can be selected under cost and use
conditions.
Structure to Prevent Mis-insertion
Lock Mechanism
sApplications
LCD (Liquid Crystal Display), Mobile phone, Note PC
A278
sProduct Specifications
Rating
Current rating 0.5A
Operating Temperature Range -45 to +125ç (Note 1) Storage Temperature Range -10 to +60ç (Note 2)
Voltage rating150V AC Operating Humidity Range 40 to 80%
Storage Humidity Range 40 to 70%
Item specification
Condition
1. Insulation Resistance 500M ohms min.
100V DC
2. Withstanding voltage No flashover or insulation breakdown.
250V AC/1 minute
3. Contact Resistance 50m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. (-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 50m ohms max:
Tin plating: 30 cycles
Gold plating: 100 cycles
Reflow: At the recommended temperature profile
8. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterial
Product
Part Material
Finish
Insulator
Polyamide
Beige
Receptacle/Header
Contact
Phosphor copper
Tin plated or gold plated
Metal fitting
Brass
Tin plating
Note:The gold plated product contact area is plated with gold, and lead plated with tin-lead.
Remarks
UL94V-0
–––––––
–––––––
s Ordering Information
Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog
page A280~A284.
qReceptacle/Header
DF9 # - * S - 1 V (**)
q
w er
ty
u
q Series Name : DF9
r Connector Type
w Type
Fitting Boss
Blank K K
A ∞K
BK∞
C∞∞
S: Receptacle
P: Header
t Contact Pitch : 1mm
y Contact Type
V: Straight SMT
u Contact Surface Finish/Packaging Type
e Number of Contacts
(20): Tin plated, tube packaging
9 to 25,31,41,51
(54): Gold plated, tube packaging
(22): Tin plated, embossed tape packaging
(59): Gold plated, embossed tape packaging
*Refer to page A284 for the bottom entry type (DF9L).
A279
|
PDF 파일 내의 페이지 : 총 8 페이지
제조업체: Hirose
( hirose )
DF9C-9P-1V connector
데이터시트 다운로드 :
[ DF9C-9P-1V.PDF ]
[ DF9C-9P-1V 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
DF9C-9P-1V
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) - Hirose
