MDF7-9P-2.54DS 반도체 회로 부품 판매점
2.54mm Pitch Bottom Entry Type Connector
|
|
 Hirose Electric |
2.54mm Pitch Bottom Entry Type Connector
MDF7 Series
sFeatures
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the
header pin through type structure and the diverse header variation.
The board to board size can be set at infinite stages.
Board to Board size Freely settable
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards aren't face each other, and can
be oriented in the same direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated
products are lined up. In addition, the header to correspond to the board
to board size are prepared. Concerning board to board size, other
products can be provided, in addition to products in this catalog. Please
contact HRS company as required.
sApplications
Internal connection of telephone sets and OA/FA equipment, connection
between IPM, IGBT and the board.
A247
sProduct Specifications
Rating
Current rating: 3A
Operating Temperature Range: -30ç to +85ç(Note 1) Storage Temperature Range: -10ç to +60ç (Note 2)
Voltage rating: 250V AC Operating Humidity Range: 40% to 70%
Storage Humidity Range: 40% to 70%(Note 2)
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance 30m ohms max.
100mA
4. Single Insertion/Extraction Force MIN 0.4N(40gf), MAX 4.4N(450gf)
Measured by the square steel pin with 0.635±0.002mm
5. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
Contact resistance: 30m ohms max.
6. Humidity (Steady state)
Insulation resistance: 500M ohms min.
96 hours at temperature of
40ç and humidity of 90% to 95%
7. Temperature Cycle
Contact resistance: 30m ohms max.
Insulation resistance: 1000M ohms min.
(-55ç: 30 minutes, 5 to 35ç: 10 minutes
(-85ç: 30 minutes, 5 to 35ç: 10 minutes) 5cycles
8. Durability
(Mating/un-mating)
Contact resistance: 30m ohms max.
Tin plating : 30 cycles
Gold plating : 50 cycles
Flow: 250ç for 10 seconds
9. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterial
Product
Receptacle
Pin Header
Part
Insulator
Contact
Insulator
Contact
Material
Polyamide
Phosphor bronze
PBT
Brass
Finish
Black
Tin plated or gold plated
Main unit: Black/Locator: Gray
Tin plated or gold plated
Remarks
UL94V-0
–––––––
UL94V-0
–––––––
sOrdering Information
MDF7 - * S - 2.54 DSA
q
we
rt
q Series Name
: MDF7
w Number of contacts : 3 to 46
e Connector Type
S : Single row receptacle
D : Double row receptacle
P : Single row pin header
DP: Double row pin header
r Contact Pitch : 2.54mm
t Contact type
DSA: Straight through hole
DS : Right Angle through hole
A248
|
PDF 파일 내의 페이지 : 총 7 페이지
제조업체: Hirose Electric
( hirose )
MDF7-9P-2.54DS connector
데이터시트 다운로드 :
[ MDF7-9P-2.54DS.PDF ]
[ MDF7-9P-2.54DS 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
MDF7-9P-2.54DS
2.54mm Pitch Bottom Entry Type Connector - Hirose Electric
MDF7-9P-2.54DSA
2.54mm Pitch Bottom Entry Type Connector - Hirose Electric