DF22-4S-7.92DSA 반도체 회로 부품 판매점
7.92 mm Contact Pitch/ High-Current Connectors for Internal Power Supplies (UL/ C-UL and TUV Listed)
|
|
 Hirose Electric |
NEW
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
DF22 Series
Complete
Locking
Function
Completely
enclosed
locking system
Protection from
shorts circuits
between adjacent
Contacts
sFeatures
1. 30 A maximum current
Single position connector can carry current of 30 A with #10 AWG
conductor. Please refer to Table #1 for current ratings for multi-
position connectors using other conductor sizes.
2. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
3. Prevention of Incorrect Connections
To prevent incorrect connection when using multiple connectors
having the same Number of contacts, 3 product types having
different mating configurations are available.
4. Molded-in contact retention tabs
Handling of terminated contacts during the crimping is easier
and avoids entangling of wires, since there are no protruding
metal tabs.
5. Prevention of incorrect board placement
Built-in posts assure correct connector placement and
orientation on the board.
6. Supports encapsulation
Connectors can be encapsulated up to 10 mm without affecting
the performance.
7. Prevention of Short Circuits Between Adjacent Contacts
Each Contact is completely surrounded by the insulator
housing electrically isolating it from adjacent contacts.
8. Increased Retention Force of Crimped Contacts and
confirmation of complete contact insertion
Separate contact retainers are provided for applications where
extreme pull-out forces may be applied against the wire or when a
visual confirmation of the full contact insertion is required.
9. Full Line of Crimp Socket Contacts
Realizing the market needs for multitude of different applications, Hirose
has developed several variants of crimp socket contacts and housings.
Continuous development is adding different variations. Contact your
nearest Hirose Electric representative for latest developments.
10. In-line Connections
Connectors can be ordered for in-line cable connections. In addition,
assemblies can be placed next to each other allowing 4 position total
(2 ∞ 2) in a small space.
11. Listed by UL, C-UL, and TÜV.
Prevention of Incorrect Connections
qR Type (Guide key: right side, Color: black)
qStandard Type (Guide key: inside, Color: natural)
qL Type (Guide key: left side, Color: red)
*The photographs on the left show header (the board dip side),
the photographs on the right show the socket (cable side).
*The guide key position is indicated in position facing
the mating surface of the header.
sApplications
Office equipment, power supplies for industrial, medical
and instrumentation applications, variety of consumer
electronic, and electrical applications.
2004.5
1
sProduct Specifications
Ratings
Current
rating
Voltage
rating
Number of contacts AWG10
1 30A
2 25A
3 25A
4 22A
5 22A
Specification
UL/C-UL
TÜV
AWG12
25A
20A
20A
18A
18A
AWG14
AWG16
20A 15A
18A 15A
18A 15A
15A 13A
15A 13A
AC/DC 1000V
AC/DC 600V
AC/DC 600V
Operating temperature range -35ç to 85ç (Note 1)
Operating humidity range 20% to 80%
Storage temperature range -10ç to 60ç (Note 2)
Storage humidity range 40% to 70% (Note 2)
UL/C-UL/TÜV File No. and Recognition No.
UL : E52653
C-UL
: E52653
TÜV
: R9950703
Item
1. Contact resistance
2. Insulator resistance
3. Withstanding voltage
4. Insertion-Extraction force (per contact)
5. Durability (mating/unmating)
6. Vibration
7. Shock
8. Humidity
9. Temperature cycle
Specification
Contact resistance(Initial value): 5 m ohms max.
1000 M ohms min.
No flashover or Insulator breakdown
0.3N min., 5N max.
Contact resistance of 10 m ohms max.
No electrical discontinuity of 1 µs. min.
No electrical discontinuity of 1 µs. min.
Contact resistance 10 m ohms max.
Contact resistance of 10 m ohms max.
Condition
20mV max., 1mA
1000 V DC
2500 V AC for 1 minute
Measured with a steel pin of 1.6 x 0.8 ± 0.002 thickness
30 cycles
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, duration of 2 hours
Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis.
Temperature 40ç ± 2ç, 90% to 95% RH, 96 hours
(-55ç: 30 minutes➝ 5 to 35ç: 5 minutes➝85ç: 30 minutes➝5 to 35ç: 5 minutes) for 5 cycles
Re-flow solder temperature 250ç, for 10 seconds
10. Resistance to Soldering heat No deformation of the insulator parts affecting performance Manual soldering: Soldering iron temperature 300ç, 3 seconds
Note 1: Current rating of header is 30A (1 pos.) and 25A (2 to 5 pos.)
Note 2: Includes temperature rise caused by the current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity
range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
sMaterials
Product
Part
Material
Finish
Sockets
Insulator
Polyamide
Color: Natural white
Crimp contacts
Contacts
High conductivity copper alloy Tin-lead plated
Headers
Insulator
Contacts
Polyamide (Glass reinforced)
High conductivity copper alloy
Color: Natural beige
Tin-lead plated
Note 1: Standard Color, colors of the differing coupling forms are black for DF22R and red for DF22L.
Note 2: Hirose Electric's plating incorporate anti-whisking compounds.
(Note 1)
(Note 2)
(Note 1)
(Note 2)
Remarks
UL94V-0
----------
UL94V-0
----------
sOrdering Information
qSocket, Header
qContacts
DF22 B L - 2 S - 7.92 C
DF22 A - 1416 SCF
1 23 45
67
18
9 10
1 Series name: DF22
2 Form Type
Sockets
Blank : Standard height, standard lock (Type I)
B : Long type, standard lock (Type III)
C : Long type, ergonomic lock (Type IV)
In-line Plugs
Blank : With panel stop
A : Without panel stop
3 Guide key type
Blank : Inside (Color: natural)
R : Right side (Color: black)
L : Left side (Color: red)
4 Number of contacts : 1 to 5
5 Connector type
S : Socket
DS : Double-row socket
P : Header
EP : In-line plug
DEP : Double-row in-line plug
RS/P : Retainer
6 Contact pitch : 7.92 mm
7 Type of housing
C : Crimp housing
DSA : Straight header
DS : Right-angle header
No letter : Retainer
8 Applicable Cable
Blank : UL1430
A : UL1015
9 Applicable Conductor
1416 : AWG 14 to AWG 16
1012 : AWG 10 to AWG 12
10 Packaging
SCF : Socket contacts / Reel
SC : Socket contacts / Bag
PCF : In-line plug contacts / Reel
PC : In-line plug contacts / Bag
2
|
PDF 파일 내의 페이지 : 총 15 페이지
제조업체: Hirose Electric
( hirose )
DF22-4S-7.92DSA connector
데이터시트 다운로드 :
[ DF22-4S-7.92DSA.PDF ]
[ DF22-4S-7.92DSA 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
DF22-4S-7.92DS
7.92 mm Contact Pitch/ High-Current Connectors for Internal Power Supplies (UL/ C-UL and TUV Listed) - Hirose Electric
DF22-4S-7.92DSA
7.92 mm Contact Pitch/ High-Current Connectors for Internal Power Supplies (UL/ C-UL and TUV Listed) - Hirose Electric