|
UCC |
( DataSheet : www.DataSheet4U.com )
LXV Series
Ⅲ Miniature
Ⅲ Low
Impedance
Ⅲ Large
Capacitance
Ⅲ Solvent Proof
Ⅲ 105؇C
Maximum
Temperature
Actual
Size
The new LXV series capacitors have a very low impedance and are designed for use in situations at
high frequencies. One example for using the LXV series would be for switching power supplies. These
capacitors have many characteristics that make them ideal for these situations including a wide
temperature range, large capacitance values and long life.
The LXV series capacitors were developed to withstand HCFC cleaning agents for five minutes
by ultrasonic, vapor or immersion. This solvent proof design allows all circuit board components
to be cleaned together, at the same time, without resorting to more expensive epoxy end-sealed
capacitors. Refer to the Mini-Glossary for recommended cleaning conditions.
Summary of Specifications
Ⅲ Radial lead terminals.
Ⅲ Capacitance range: 5.6 to 15,000µF.
Ⅲ Voltage range: 6.3 to 100VDC.
Ⅲ Operating temperature range: 55؇C to 105؇C.
Ⅲ Leakage current: 0.01CV or 3µA, whichever is greater, after 2 minutes at 20؇C.
Ⅲ Standard capacitance tolerance: ؓ20%
Ⅲ Nominal case size ( DL): 511.5mm to 1840mm.
Ⅲ Rated lifetime: 2,000 to 5,000 hours at 105؇C with the rated ripple current applied,
depending on case size.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 207
www.DataSheet4U.com
www.DataSheet4U.com
LXV Series
LXV Specifications
Item
Operating Temperature Range
Rated Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Dissipation Factor ( Tan ␦)
Impedance at 100kHz
Low Temperature
Characteristics
Ripple Current Multipliers
Refer to Section 4 of the
Mini-Glossary for explanation
of Ripple Current Multipliers.
Load Life
Shelf Life
Others
Characteristics
55 to 105؇C
6.3 to 100VDC
5.6 to 15,000F
ؓ20% ( M ) at 20؇C, 120Hz
I 0.01CV or 3A, whichever is greater, after 2 minutes at 20؇C.
Where I = Leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V )
At 20؇C, 120Hz
Rated Voltage ( V ) 6.3
10
16
25
35
50
63
80 100
Tan ␦ ( DF )
0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.09 0.08
When nominal capacitance exceeds 1,000F, add 0.02 to the values above for each 1,000F increase.
At 100kHz, maximum impedance at 20؇C and 10؇C is specified in the Ratings Tables.
At 120Hz, capacitance change at 55؇C shall be within 30% of the specified value at 20؇C.
At 120Hz, impedance at 55؇C shall not exceed 400% (6.3V ) or 300% (10 to 63V ) of the
specified value at 20؇C.
Ambient Temperature (؇C )
≤ 65؇C
2.23
85؇C
1.73
105؇C
1.00
Frequency (Hz )
DC Rated Voltage
6.3V, 10V
16V, 25V
35V, 50V
63V, 80V, 100V
Case Diameter
Ø5-Ø8
Ø10 - Ø12.5
Ø16 - Ø18
Ø5-Ø8
Ø10 - Ø12.5
Ø16 - Ø18
Ø5-Ø8
Ø10 - Ø12.5
Ø16 - Ø18
Ø5-Ø8
Ø10 - Ø12.5
Ø16 - Ø18
120Hz
0.65
0.70
0.85
0.55
0.65
0.70
0.40
0.50
0.60
0.20
0.35
0.50
1kHz
0.83
0.85
0.92
0.76
0.83
0.87
0.66
0.73
0.81
0.55
0.65
0.75
10kHz
0.95
0.96
0.97
0.91
0.93
0.96
0.85
0.89
0.94
0.80
0.85
0.90
100kHz
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
The following specifications shall be satisfied when the capacitors are restored to 20؇C after
subjecting them to the DC rated voltage for the specified test time at 105؇C with the rated
ripple current applied. The sum of DC voltage and peak AC voltage must not exceed the full
rated voltage of the capacitors.
Case Diameter
Ø5 & Ø6.3mm
Ø8 & Ø10mm
Ø12.5mm & above
Test Time
2,000 hours
3,000 hours
5,000 hours
Capacitance change: ≤ ؓ20% of initial measured value
Tan ␦ ( DF )
: ≤ 200% of initial specified value
Leakage current : ≤ initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20؇C after
exposing them for 1,000 hours at 105؇C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Capacitance change: ≤ ؓ20% of initial measured value
Tan ␦ ( DF )
: ≤ 200% of initial specified value
Leakage current : ≤ initial specified value
Satisfies characteristic W of JIS C5141
208 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
|