AM42-0002 반도체 회로 부품 판매점
GaAs MMIC VSAT Power Amplifier
|
|
 Tyco Electronics |
GaAs MMIC VSAT Power Amplifier 1.4 W
14.0 - 14.5 GHz
Features
• High Linear Gain: 22 dB Typical
• High Saturated Output Power: +31.5 dBm Typical
• High Power Added Efficiency: 22% Typical
• 50 Ω Input/Output Broadband Matched
• Integrated Output Power Detector
• Lead-Free Ceramic Bolt Down Package
• RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM’s AM42-0002 is a three-stage MMIC
linear power amplifier in a lead-free, ceramic bolt
down style hermetic package. The AM42-0002
employs a fully matched chip with internally
decoupled gate and drain bias networks and an
output power detector. The AM42-0002 is designed
to be operated from a constant voltage drain supply.
The AM42-0002 is designed for use as an output
stage or a driver, in applications for VSAT systems.
This design is fully monolithic and requires a
minimum of external components.
www.DataSheet4U.com
M/A-COM’s AM42-0002 is fabricated using a mature
0.5 micron GaAs MESFET process. The process
features full passivation for increased performance
and reliability. This product is 100% RF tested to
ensure compliance to performance specifications.
Ordering Information
Part Number
AM42-0002
Package
Ceramic Bolt Down Package
RoHS
Compliant
Functional Schematic
AM42-0002
V4
GND
GND
RFIN
VGG
GND
GND
GND
RFOUT
VDET
VDD
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
9
10
Pin Name
GND
GND
RFIN
VGG
GND
VDD
VDET
RFOUT
GND
GND
Description
DC and RF Ground
DC and RF Ground
RF Input
Gate Supply
DC and RF Ground
Voltage Drain Supply
Output Power Detector
RF Output
DC and RF Ground
DC and RF Ground
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
GaAs MMIC VSAT Power Amplifier 1.4 W
14.0 - 14.5 GHz
RoHS
Compliant
AM42-0002
V4
Electrical Specifications: TA = 25°C, VDD = +9 V, VGG = -5.0 V, Z0 = 50 Ω
Parameter
Linear Gain
Input VSWR
Output VSWR
Saturated Output Power
Output Power at P1dB
Output IP3
Power Added Efficiency
Bias Current
Thermal Resistance
Detector Output Voltage
Test Conditions
PIN < 0 dBm
PIN < 0 dBm
PIN < 0 dBm
PIN = +14 dBm
—
Two +24 dBm output tones @ 1 MHz spacing
PIN = +14 dBm
PIN = +14 dBm
25°C Heat Sink
RL = 10 K Ω, POUT = +31 dBm
Units
dB
Ratio
Ratio
dBm
dBm
dBm
%
mA
°C/W
V
Min.
19
—
—
30.5
—
—
—
—
—
—
Typ.
22
2.5:1
2.7:1
31.5
29.5
39
22
800
10
+3.5
Max.
—
2.7:1
—
—
—
—
—
1400
—
—
Absolute Maximum Ratings 1,2,3
Application Schematic 4,5,8,9
www.DataSheet4U.com
1.
2.
3.
Parameter
Absolute Maximum
VDD
VGG
RF Input Power
12 Volts
-10 Volts
+23 dBm
Channel Temperature
150°C
Storage Temperature
-65°C to +150°C
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
Case Temperature (TC) = +25°C.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
4. Nominal bias is obtained by first connecting –5 volts to pin
4 (VGG), followed by connection +9 volts to pin 6 (VDD).
Note sequence.
5. RF ground and thermal interface is the flange (case bot-
tom). Adequate heat sinking is required.
6. No DC bias voltage appears at the RF ports.
7. The DC resistance at the input port is an open circuit and
at the output port is a short circuit.
8. For optimum IP3 performance, the VDD bypass capacitors
should be placed within 0.5 inches of pin 6.
9. Resistor and capacitors surrounding the amplifier are
suggestions and not included as part of the AM42-0002.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
|
PDF 파일 내의 페이지 : 총 4 페이지
제조업체: Tyco Electronics
( tyco )
AM42-0002 amplifier
데이터시트 다운로드 :
[ AM42-0002.PDF ]
[ AM42-0002 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
AM42-0002
GaAs MMIC VSAT Power Amplifier - Tyco Electronics
AM42-0007
GaAs MMIC VSAT Power Amplifier 2.0W 14.0 - 14.5 GHz - Tyco Electronics
AM42-0007
GaAs MMIC VSAT Power Amplifier - MA-COM