|
|
Número de pieza | CM3018 | |
Descripción | Micropower 150mA Low Noise CMOS Regulator | |
Fabricantes | California Micro Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CM3018 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! PRELIMINARY
CM3018www.DataSheet4U.com
Micropower, 150mA Low Noise CMOS Regulator
with Fast Response
Features
• Available with 1.5V, 1.8V, 2.5V, 2.6V, 2.8V, 2.85V,
2.9V, 3.0V, 3.1V or 3.3V outputs
• Fast (60µs) VOUT response when enabled
• Ultra low noise (35µV rms typ.)
• Delivers up to 150mA output current
• Very low dropout (150mV at 150mA)
• Low quiescent operating current (110µA)
• Stable with low-ESR ceramic capacitors
• “Zero” disable mode current consumption
• Thermal overload protection
• Foldback overload current protection
• -40°C to +85°C temperature operation
• Available in a 5-pin SOT23 and 5-bump Chip Scale
Packages (CSP)
• Lead-free versions available
Applications
• Wireless handsets, PDAs, MP3 players, digital
cameras
• PCs and notebooks
• Graphics cards, set-top boxes
• Compact Flash memory cards
• Battery-powered devices
• PC cards
Product Description
The CM3018 is a very low dropout, low noise regulator
that delivers up to 150mA of load current at a fixed out-
put voltage.
A dedicated control input (EN, Active High) provides
power-up sequencing flexibility. When this input is
taken low, the regulator is disabled. In this state, the
supply current will drop to near zero. An internal dis-
charge MOSFET resistance (300Ω) will force the out-
put to ground whenever the device is disabled.
An optional bypass pin is provided for further improve-
ment of noise performance and to maximize the power
supply ripple rejection.
The CM3018 is fully protected, offering both overload
current limiting and high temperature thermal shut-
down.
The CM3018 is available in a tiny 5 lead SOT-23 pack-
age or a 5-bump CSP and is ideal for space critical
applications. The CSP version of the CM3018 incorpo-
rates OptiGuardTM technology to provide increased reli-
ability at assembly.
All versions of the CM3018 are now available with
optional lead-free finishing.
Typical Application Circuit
Simplified Electrical Schematic
CM3018
+ CIN +
- 1µF
GND
VIN
VOUT
EN
BYP
GND
CBYP
10nF
COUT +
1µF
OUT
VIN
EN
BYP
GND
VREF
+
-
1x
VOUT
© 2004 California Micro Devices Corp. All rights reserved.
07/29/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ▲ Tel: 408.263.3214
▲ Fax: 408.263.7846 ▲ www.calmicro.com
1
1 page PRELIMINARY
CM3018www.DataSheet4U.com
Specifications (continued)
ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1)
SYMBOL PARAMETER
VOUT Regulator Output Voltage
VOUTRT Regulator Response Time
RDROPOUT Dropout Resistance
VR LOAD Load Regulation
VR LINE Line Regulation
ILIM Overload Current Limit
ISC Short Circuit Current Limit
RDISCH Discharge Resistance
IGND Ground Current
VIH
VIL
IEN
TDISABLE
THYST
PSRR
Enable High Threshold
Enable Low Threshold
Enable Input Current
Shutdown Temperature
Thermal Hysteresis
Ripple Rejection
eN Output Noise
CONDITIONS
TA = 25°C;
0mA < ILOAD < 150mA; VIN-VOUT = 1V
0°C < TA < 125°C;
0mA < ILOAD < 150mA; VIN-VOUT = 1V
-40°C < TA < 125°C;
0mA < ILOAD < 150mA; VIN-VOUT = 1V
No Load; COUT = 1µf Ceramic Cap
0mA < ILOAD < 150mA
VIN-VOUT = 1V; 10mA < ILOAD < 150mA
3.3V < VIN < 4.3V; ILOAD = 5mA
VOUT < 1V
EN tied to ground; VIN = 3.0V
with EN tied to VIN; ILOAD = 0mA:
with EN tied to VIN; ILOAD = 150mA:
with EN tied to GND (Disable Mode):
Regulator enabled
Regulator shutdown
VEN > 0.8V
ƒ = 120Hz; VIN − VOUT = 1V;
ILOAD= 100µA; COUT = 1µF Ceramic;
CBYP = 10nF
300Hz-100kHz; COUT = 10µF Ceramic;
CBYP = 10nF
MIN TYP MAX
-1% +1%
-2% +2%
-3% +3%
60
1 1.3
.25
0.15
400
200
300
100 200
110 250
0.1 10
0.8 1.2
0.4 0.7
.01
150
15
60
35
Note 1: Electrical operating characteristics are guaranteed over standard operating conditions unless otherwise noted.
UNITS
V
V
V
µs
Ω
%
%/V
mA
mA
Ω
µA
µA
µA
V
V
µA
°C
°C
dB
µVrms
© 2004 California Micro Devices Corp. All rights reserved.
07/29/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ▲ Tel: 408.263.3214
▲ Fax: 408.263.7846 ▲ www.calmicro.com
5
5 Page PRELIMINARY
CM3018www.DataSheet4U.com
Mechanical Details
CSP Mechanical Specifications
CM3018CS/CP devices are packaged in a custom
Chip Scale Package (CSP) with OptiGuardTM coating.
Dimensions are presented below. For complete infor-
mation on CSP packaging, see the California Micro
Devices CSP Package Information document.
PACKAGE DIMENSIONS
Package
Custom CSP
Bumps
5
Millimeters
Inches
Dim
Min Nom Max Min Nom Max
A1 0.961 1.006 1.051 0.0378 0.0396 0.0414
A2 1.418 1.463 1.508 0.0558 0.0576 0.0594
B1 0.495 0.500 0.505 0.0195 0.0197 0.0199
B2 0.245 0.250 0.255 0.0096 0.0098 0.0100
B3 0.430 0.435 0.440 0.0169 0.0171 0.0173
B4 0.430 0.435 0.440 0.0169 0.0171 0.0173
C1 0.203 0.253 0.303 0.0080 0.0100 0.0119
C2 0.247 0.297 0.347 0.0097 0.0117 0.0136
D1 0.600 0.670 0.739 0.0236 0.0264 0.0291
D2 0.394 0.445 0.495 0.0155 0.0175 0.0195
# per tape and
reel
3500 pieces
Controlling dimension: millimeters
CSP Tape and Reel Specifications
PART
NUMBER
CM3018
CHIP SIZE (mm)
1.463 X 1.006 X 0.670
POCKET SIZE (mm)
B0 X A0 X K0
1.67 X 1.17 X 0.730
Mechanical Package Diagrams
BOTTOM VIEW
A1
C1
B2
B1
C
B
A
123
0.30 DIA.
63/37 Sn/Pb
SOLDER BUMPS
OptiGuardTM
Coating
D1
D2
SIDE
VIEW
DIMENSIONS IN MILLIMETERS
Custom 5-Bump Chip Scale Package
TAPE WIDTH
W
8mm
REEL
DIAMETER
178mm (7")
QTY PER
REEL
3500
P0
4mm
P1
4mm
Top
Cover
Tape
Ko
Po
Ao
Bo
10 Pitches Cumulative
±To0l.e2ramnmce On Tape
W
For Tape Feeder Reference
Only including Draft.
Concentric Around B.
Embossment
P1
User Direction of Feed
Center Lines
of Cavity
Figure 1. Tape and Reel Mechanical Data
© 2004 California Micro Devices Corp. All rights reserved.
07/29/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ▲ Tel: 408.263.3214
▲ Fax: 408.263.7846 ▲ www.calmicro.com
11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet CM3018.PDF ] |
Número de pieza | Descripción | Fabricantes |
CM3014 | MICROPOWER 150MA LOW DROPOUT CMOS REGULATOR | California Micro Devices |
CM3015 | Micropower 300mA Low Dropout CMOS Regulator | California Micro Devices |
CM3016-48 | Micropower 4.75V/500mA Low Noise CMOS LDO Regulator | California Micro Devices |
CM3018 | Micropower 150mA Low Noise CMOS Regulator | California Micro Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |