|
|
PDF SRF-2016 Data sheet ( Hoja de datos )
| Número de pieza | SRF-2016 | |
| Descripción | Silicon Germanium IF Receiver | |
| Fabricantes | Sirenza Microdevices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SRF-2016 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
Product Description
The Sirenza Microdevices’ SRF-2016 is a quadrature demodulator
RFIC designed for UHF and microwave receiver IF applications. This
device features switchable gain control, high P1dB, and excellent I/Q
amplitude and phase balance.
Use of this highly integrated device can result in lower component
count, a more compact assembly, and higher transceiver card yields.
The device is packaged in an industry standard 16 pin TSSOP with
exposed paddle for superb RF and thermal ground.
The matte tin finish on Sirenza’s lead-free package utilizes a post
annealing process to mitigate tin whisker formation and is RoHS compli-
ant per EU directive 2002/95. This package is also manufactured with
green molding compounds that contain no antimony trioxide nor haloge-
nated fire retardants.
Functional Block Diagram
BBIN 1
BBIP 2
VCC 3
GC2 4
www.DataSheet4U.cGomC1
5
VEE 6
VCC 7
INP 8
0/90
16 BBQP
15 BBQN
14 VCC
13 LOP
12 LON
11 VEE
10 VCC
9 INN
SRF-2016
SRF-2016Z
Pb RoHS Compliant
& Green Package
200 - 600 MHz
Silicon Germanium IF Receiver
16 pin TSSOP with Exposed Ground Pad
Package Footprint: 0.197 x 0.252 inches (5.0 x 6.4 mm)
Package Height: 0.039 inches (1.0 mm)
Product Features
• Available in Lead Free, RoHS compliant, and
Green packaging
• Gain control in 20dB steps
• Excellent I/Q amplitude and phase balance
• Output P1dB > +4 dBm over all gain settings
Applications
• Digital and spread spectrum communication
systems
• Cellular, PCS, DCS, 2G, 2.5G, 3G transceivers
• ISM band transceivers
• Point-to-point microwave receivers
• Broadband wireless systems
Product Specifications – I/Q Output
Parameters
Additional Test Conditions
I/Q Output Frequency Range
I/Q Output Amplitude Balance
I/Q Output Phase Balance
I/Q Output Common-mode Voltage
I/Q Output Return Loss
50 ohm nominal differential output
Unit
MHz
dB
deg
V
dB
Min.
DC
-0.2
-2
Typ.
2.5
20
Max.
500
0.2
2
Product Specifications – LO Input
Parameters
Additional Test Conditions
LO Frequency Range
LO Input Level
LO Return Loss
50 ohm nominal differential input, Note 1
Unit
Min.
Typ.
Max.
MHz
200
600
dBm
-3
0
+3
dB 20
Performance tests and ratings for Sirenza Microdevices' products were performed internally by Sirenza and measured using specific computer systems and/or components and reflect the approximate performance of the products as measured by
those tests. Any difference in circuit implementation, test software, or test equipment may affect actual performance. The information provided herein is believed to be reliable at press time and Sirenza Microdevices assumes no responsibility for
the use of this information. All such use shall be entirely at the user's own risk. Prices and specifications for Sirenza Microdevices' products are subject to change without notice. Buyers should consult Sirenza Microdevices' standard terms and
conditions of sale for Sirenza's limited warranty with regard to its products. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any product
for use in life-support devices and/or systems. Copyright 2006 Sirenza Microdevices, Inc. All worldwide rights reserved.
303 South Technology Court
Broomfield, CO 80021
Phone: (800) SMI-MMIC
1
http://www.sirenza.com
EDS 102137 Rev C
1 page  
SRF-2016 SiGe IF Receiver
35
30
25
20
15
10
5
0
-5
-10
-40
-20
Gain vs. Temperature
0 20 40
Temperature, C
60
80
Low Gain
Med Gain
High Gain
9
8
7
6
5
4
-40
-20
Output P1dB vs. Temperature
0 20 40 60 80
Temperature, C
Low Gain
Med Gain
High Gain
40
35
30
25
20
15
10
5
0
-40
-20
Noise Figure vs. Temperature
0 20 40 60 80
Temperature, C
Low Gain
Med Gain
High Gain
Output P1dB vs. LO Power
6
5
4
3
2
1
-4 -3 -2 -1 0 1 2 3 4
LO Power, dBm
Low Gain
Med Gain
High Gain
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
0
Amplitude Difference vs. LO Frequency
100 200 300 400 500 600 700 800 900 1000
LO Frequency, MHz
Phase Difference vs. LO Frequency
91
90.5
90
89.5
89
88.5
88
0
100 200 300 400 500 600 700 800 900 1000
LO Frequency, MHz
Unless otherwise stated, measurements were taken with an IF frequency of 400 MHz, an LO frequency of 401 MHz, a base-
band output of 1 MHz, an LO power of 0dBm, at room temperature, with a supply voltage of 5 volts. Measurements were
done on the evaluation board.
303 South Technology Court
Broomfield, CO 80021
Phone: (800) SMI-MMIC
5
http://www.sirenza.com
EDS 102137 Rev C
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet SRF-2016.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SRF-2016 | Silicon Germanium IF Receiver | Sirenza Microdevices |
| SRF-2016Z | Silicon Germanium IF Receiver | Sirenza Microdevices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |