|
|
PDF SY89307V Data sheet ( Hoja de datos )
| Número de pieza | SY89307V | |
| Descripción | VARIABLE OUTPUT SWING PECL/ECL DIFFERENTIAL RECEIVER | |
| Fabricantes | Micrel Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SY89307V (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Micrel, Inc.
5V/3.3V 2.5Gbps VARIABLE
OUTPUT SWING PECL/ECL
DIFFERENTIAL RECEIVER
Precison Edge®
Precision ESYd8g9e30®7V
SY89307V
FEATURES
s 3.3V and 5V power supply options
s >2.5Gbps maximum throughput
Precision Edge®
s Fast output transitions <160ps tr / tf
s 100k compatible PECL/ECL I/O
DESCRIPTION
s Functionally equivalent to SY88927V and
The SY89307V is a differential receiver with a variable
SY100EP16VS
output swing. It is functionally equivalent to the
s Variable output swing from 100mV to 700mV
s Guaranteed operation over –40°C to +85°C
temperature range
s Available in ultra-small 8-pin MLF® (2mm x 2mm)
package
SY100EP16VS but in an ultra-small 8-lead MLF® package
that features a 70% smaller footprint. Like the EP16VS its
variable output swing makes it ideal for use as a VCSEL
laser driver.
The operational range of the SY89307V control input is
from VBB (maximum output swing) to VCC (minimum output
swing). The output swing can be controlled by a variable
APPLICATIONS
resistor between the VBB pin and VCC with the wiper driving
VCTRL.
The SY89307V provides a VBB output for either single-
ended use or as a DC bias for AC-coupling to the device.
s Multimode optical transceiver
s VCSEL driver
s Backplane receiver
The VBB pin should be used only as a bias for this device
as its current sink/source capability is limited. Whenever
used, the VBB pin should be bypassed to VCC via a 0.01µF
www.DataSheect4aU.pcoam citor.
Under open input conditions the Q output will be LOW.
TYPICAL VOLTAGE OUTPUT SWING
100
90 +105°C
80
70
60 +45°C
50
40
30
20 -40°C
10
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
VCC – VCTRL
Typical Voltage Output Swing
VCC = 3.3V or 5V
Precision Edge is a registered trademark of Micrel, Inc.
MicroLeadFrame and MLF are registered trademarks of Amkor Technology, Inc.
M9999-051006
[email protected] or (408) 955-1690
1
Rev.: C Amendment: /0
Issue Date: May 2006
1 page  
Micrel, Inc.
8 LEAD ULTRA-SMALL EPAD-MicroLeadFrame® (MLF-8)
Precison Edge®
SY89307V
Package
EP- Exposed Pad
Die
CompSide Island
Heat Dissipation
Heat Dissipation
Heavy Copper Plane
Heavy Copper Plane
VEE
VEE
PCB Thermal Consideration for 8-Pin MLF® Package
Package Notes:
1. Package meets Level 2 qualification.
2. All parts are dry-packaged before shipment.
3. Exposed pads must be soldered to a plane equivalent to device VEE for proper thermal management.
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com
The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2006 Micrel, Incorporated.
M9999-051006
[email protected] or (408) 955-1690
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet SY89307V.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SY89307V | VARIABLE OUTPUT SWING PECL/ECL DIFFERENTIAL RECEIVER | Micrel Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |