|
|
PDF SI7792DP Data sheet ( Hoja de datos )
| Número de pieza | SI7792DP | |
| Descripción | N-Channel 30 V (D-S) MOSFET | |
| Fabricantes | Vishay Siliconix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SI7792DP (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
New Product
Si7792DP
Vishay Siliconix
N-Channel 30 V (D-S) MOSFET with Schottky Diode
PRODUCT SUMMARY
VDS (V)
RDS(on) ()
0.0021 at VGS = 10 V
30
0.0026 at VGS = 4.5 V
ID (A)a
60
60
Qg (Typ.)
41 nC
PowerPAK® SO-8
FEATURES
• Halogen-free According to IEC 61249-2-21
Definition
• SkyFET™ Monolithic TrenchFET® Gen III
Power MOSFET and Schottky Diode
• 100 % Rg Tested
• 100 % Avalanche Tested
• Compliant to RoHS Directive 2002/95/EC
6.15 mm
D
8D
7
D
6
D
5
S
1S
5.15 mm
2
S
3G
4
Bottom View
Ordering Information: Si7792DP-T1-GE3 (Lead (Pb)-free and Halogen-free)
APPLICATIONS
• Low Side in Vcore, System and Memory
- Notebook PCs
D
G
N-Channel MOSFET
S
Schottky
Diode
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
Parameter
Symbol
Drain-Source Voltage
Gate-Source Voltage
VDS
VGS
Continuous Drain Current (TJ = 150 °C)
Pulsed Drain Current (t = 300 µs)
TC = 25 °C
TC = 70 °C
TA = 25 °C
TA = 70 °C
ID
IDM
Continuous Source-Drain Diode Current
Single Pulse Avalanche Current
Single Pulse Avalanche Energy
TC = 25 °C
TA = 25 °C
L =0.1 mH
IS
IAS
EAS
Maximum Power Dissipation
TC = 25 °C
TC = 70 °C
TA = 25 °C
PD
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)d, e
TA = 70 °C
TJ, Tstg
Limit
30
± 20
60a
60a
40.6b, c
32.5b, c
100
60a
5.6b, c
50
125
104
66.6
6.25b, c
4.0b, c
- 55 to 150
260
Unit
V
A
mJ
W
°C
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Typical
Maximum
Unit
Maximum Junction-to-Ambientb, f
Maximum Junction-to-Case (Drain)
t 10 s
Steady State
RthJA
RthJC
15
0.9
20
°C/W
1.2
Notes:
a. Package limited.
b. Surface mounted on 1" x 1" FR4 board.
c. t = 10 s.
d. See solder profile (www.vishay.com/ppg?73257). The PowerPAK SO-8 is a leadless package. The end of the lead terminal is exposed copper
(not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not
required to ensure adequate bottom side solder interconnection.
e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components.
f. Maximum under steady state conditions is 54 °C/W.
Document Number: 67641
www.vishay.com
S11-0856-Rev. A, 02-May-11
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
New Product
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
180
Si7792DP
Vishay Siliconix
144
108
72 Package Limited
36
0
0 25 50 75 100 125 150
TC - Case Temperature (°C)
Current Derating*
125 3.0
100 2.4
75 1.8
50 1.2
25 0.6
0
0 25 50 75 100 125 150
TC - Case Temperature (°C)
Power, Junction-to-Case
0.0
0
25 50 75 100 125
TA - Ambient Temperature (°C)
Power, Junction-to-Ambient
150
* The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper
dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package
limit.
Document Number: 67641
www.vishay.com
S11-0856-Rev. A, 02-May-11
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
www.DataSheet.co.kr
AN821
Vishay Siliconix
SYSTEM AND ELECTRICAL IMPACT OF
PowerPAK SO-8
In any design, one must take into account the change in
MOSFET rDS(on) with temperature (Figure 7).
On-Resistance vs. Junction Temperature
1.8
1.6
VGS = 10 V
ID = 23 A
1.4
1.2
1.0
Suppose each device is dissipating 2.7 W. Using the
junction-to-foot thermal resistance characteristics of the
PowerPAK SO-8 and the standard SO-8, the die tem-
perature is determined to be 107 °C for the PowerPAK
(and for DPAK) and 148 °C for the standard SO-8. This
is a 2 °C rise above the board temperature for the Pow-
erPAK and a 43 °C rise for the standard SO-8. Referring
to Figure 7, a 2 °C difference has minimal effect on
rDS(on) whereas a 43C difference has a significant effect
on rDS(on).
Minimizing the thermal rise above the board tempera-
ture by using PowerPAK has not only eased the thermal
design but it has allowed the device to run cooler, keep
rDS(on) low, and permits the device to handle more cur-
rent than the same MOSFET die in the standard SO-8
package.
0.8
0.6
- 50 - 25
0
25 50 75 100 125 150
TJ - Junction Temperature (°C)
Figure 7. MOSFET rDS(on) vs. Temperature
A MOSFET generates internal heat due to the current
passing through the channel. This self-heating raises
the junction temperature of the device above that of the
PC board to which it is mounted, causing increased
power dissipation in the device. A major source of this
problem lies in the large values of the junction-to-foot
thermal resistance of the SO-8 package.
PowerPAK SO-8 minimizes the junction-to-board ther-
mal resistance to where the MOSFET die temperature is
very close to the temperature of the PC board. Consider
two devices mounted on a PC board heated to 105 °C
by other components on the board (Figure 8).
PowerPAK SO-8
107 °C
Standard SO-8
148 °C
CONCLUSIONS
PowerPAK SO-8 has been shown to have the same
thermal performance as the DPAK package while hav-
ing the same footprint as the standard SO-8 package.
The PowerPAK SO-8 can hold larger die approximately
equal in size to the maximum that the DPAK can accom-
modate implying no sacrifice in performance because of
package limitations.
Recommended PowerPAK SO-8 land patterns are pro-
vided to aid in PC board layout for designs using this
new package.
Thermal considerations have indicated that significant
advantages can be gained by using PowerPAK SO-8
devices in designs where the PC board was laid out for
the standard SO-8. Applications experimental data gave
thermal performance data showing minimum and typical
thermal performance in a SO-8 environment, plus infor-
mation on the optimum thermal performance obtainable
including spreading copper. This further emphasized the
DPAK equivalency.
PowerPAK SO-8 therefore has the desired small size
characteristics of the SO-8 combined with the attractive
thermal characteristics of the DPAK package.
0.8 °C/W
PC Board at 105 °C
16 C/W
Figure 8. Temperature of Devices on a PC Board
www.vishay.com
4
Document Number 71622
28-Feb-06
Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet SI7792DP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SI7792DP | N-Channel 30 V (D-S) MOSFET | Vishay Siliconix |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |