|
ON Semiconductor |
MC1403, B
Low Voltage Reference
A precision band−gap voltage reference designed for critical
instrumentation and D/A converter applications. This unit is designed
to work with D/A converters, up to 12 bits in accuracy, or as a
reference for power supply applications.
• Output Voltage: 2.5 V "25 mV
• Input Voltage Range: 4.5 V to 40 V
• Quiescent Current: 1.2 mA Typical
• Output Current: 10 mA
• Temperature Coefficient: 10 ppm/°C Typical
• Guaranteed Temperature Drift Specification
• Equivalent to AD580
• Standard 8−Pin DIP, and 8−Pin SOIC Package
Typical Applications
• Voltage Reference for 8 to 12 Bit D/A Converters
• Low TC Zener Replacement
• High Stability Current Reference
• Voltmeter System Reference
• Pb−Free Package is Available
MAXIMUM RATINGS (TA = 25°C, unless otherwise noted.) www.DataSheet4U.com
Rating
Symbol
Value
Unit
Input Voltage
Storage Temperature
Junction Temperature
Operating Ambient Temperature Range
MC1403B
MC1403
VI
Tstg
TJ
TA
40
−65 to 150
+175
V
°C
°C
−40 to +85
0 to + 70
°C
°C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
http://onsemi.com
PRECISION LOW VOLTAGE
REFERENCE
8
1
8
1
PDIP−8
P1 SUFFIX
CASE 626
SOIC−8
D SUFFIX
CASE 751
PIN CONNECTIONS
Vin 1
Vout 2
GND 3
NC 4
8 NC
7 NC
6 NC
5 NC
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2005
March, 2005 − Rev. 4
1
Publication Order Number:
MC1403/D
MC1403, B
+ 5.0 V
1 MC1403 2 2.5 V 1.0 k
R1
3
Full Scale
Adjust 500 W
R2 IRef
Reference
Amplifier
Monolithic D/A
Converter
*0.1 mF
C1
1.2 k
R3
* Caution: System stability may be affected if output capacitance
* exceeds 1.0 mF. Using higher capacitance values is not
* recommended and should be carefully considered.
Figure 1. A Reference for Monolithic D/A Converters
Providing the Reference Current
for ON Semiconductor Monolithic D/A Converters
The MC1403 makes an ideal reference for many mono-
lithic D/A converters, requiring a stable current reference of
nominally 2.0 mA. This can be easily obtained from the
MC1403 with the addition of a series resistor, R1. A variable
resistor, R2, is recommended to provide means for full−
scale adjust on the D/A converter.
The resistor R3 improves temperature performance by
matching the impedance on both inputs of the D/A reference
amplifier. The capacitor decouples any noise present on the
reference line. It is essential if the D/A converter is located
any appreciable distance from the reference.
A single MC1403 reference can provide the required
current input for up to five of the monolithic D/A converters.
ELECTRICAL CHARACTERISTICS (Vin = 15 V, TA = 25°C, unless otherwise noted.)
Characteristic
Symbol
Min
Output Voltage
(IO = 0 mA)
Temperature Coefficient of Output Voltage*
MC1403
Vout
DVO/DT
2.475
−
Output Voltage Change*
(Over specified temperature range)
MC1403B 0 to + 70°C
MC1403B −40 to + 85°C
DVO
−
−
Line Regulation (IO = 0 mA)
(15 V p VI p 40 V)
(4.5 V p VI p 15 V)
Load Regulation
(0 mA < IO < 10 mA)
Quiescent Current
(IO = 0 mA)
Regline
Regload
IQ
−
−
−
−
*Guaranteed but not tested.
Typ
2.5
10
−
−
1.2
0.6
−
1.2
Max
2.525
40
7.0
12.5
4.5
3.0
10
1.5
Unit
V
ppm/°C
mV
mV
mV
mA
http://onsemi.com
2
|