|
NXP Semiconductors |
INTEGRATED CIRCUITS
DATA SHEET
TEA1113
Low voltage versatile telephone
transmission circuit with dialler
interface
Product specification
Supersedes data of 1996 Feb 08
File under Integrated Circuits, IC03
1997 Mar 27
Philips Semiconductors
Low voltage versatile telephone
transmission circuit with dialler interface
Product specification
TEA1113
FEATURES
• Low DC line voltage; operates down to 1.6 V (excluding
polarity guard)
• Voltage regulator with adjustable DC voltage
• Provides a supply for external circuits
• Symmetrical high impedance inputs (64 kΩ) for
dynamic, magnetic or piezo-electric microphones
• Asymmetrical high impedance input (32 kΩ) for electret
microphones
• DTMF input with confidence tone
• MUTE input for pulse or DTMF dialling
• Receiving amplifier for dynamic, magnetic or
piezo-electric earpieces
• Dynamic limitation in the transmit direction to prevent
distortion of the transmit line and sidetone signals
• AGC line loss compensation for microphone and
earpiece amplifiers
• LED on-hook/off-hook status indication
• Microphone mute function available with switch.
APPLICATION
• Line powered telephone sets, cordless telephones, fax
machines and answering machines.
GENERAL DESCRIPTION
The TEA1113 is a bipolar integrated circuit that performs
all speech and line interface functions required in fully
electronic telephone sets. It performs electronic switching
between speech and dialling. The IC operates at a line
voltage down to 1.6 V DC (with reduced performance) to
facilitate the use of telephone sets connected in parallel.
A current (proportional to the line current and internally
limited to 19.5 mA) is available to drive an LED which
indicates the on-hook/off-hook status.
The transmit signal on the line is dynamically limited to
prevent distortion at high transmit levels for both the
sending line and sidetone signals. The microphone
amplifier can be disabled during speech condition by
means of a microphone mute function.
All statements and values refer to all versions unless
otherwise specified.
QUICK REFERENCE DATA
Iline = 15 mA; VEE = 0 V; RSLPE = 20 Ω; CDLS = 470 nF; AGC pin connected to VEE; Zline = 600 Ω; f = 1 kHz;
Tamb = 25 °C; unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Iline line current operating range
ILED(max)
maximum supply current available
VLN
VLN(max)(p-p)
DC line voltage
maximum output voltage swing
(peak-to-peak value)
normal operation
with reduced performance
Iline = 18 mA
Iline > 76 mA
11
1
−
−
3.7
3.8
− 140
− 11
0.6 −
19.5 −
4.0 4.3
4.65 −
mA
mA
mA
mA
V
V
ICC
VCC
Gvtrx
∆Gvtrx
∆Gvtxm
internal current consumption
supply voltage for peripherals
typical voltage gain range
microphone amplifier
receiving amplifier
gain control range for microphone and
receiving amplifiers with respect to
Iline = 15 mA
microphone amplifier gain reduction
VCC = 3.2 V
Ip = 0 mA
VMIC = 2 mV (RMS)
VIR = 4 mV (RMS)
Iline = 85 mA
− 1.3 1.6 mA
2.8 3.2 −
V
38.8 −
19.3 −
− 5.8
51.8 dB
31.3 dB
− dB
− 80 − dB
1997 Mar 27
2
|