DataSheet.es    


PDF SN8P2711A Data sheet ( Hoja de datos )

Número de pieza SN8P2711A
Descripción 8-Bit Micro-Controller
Fabricantes Sonix　
Logotipo Sonix Logotipo



Hay una vista previa y un enlace de descarga de SN8P2711A (archivo pdf) en la parte inferior de esta página.


Total 70 Páginas

No Preview Available ! SN8P2711A Hoja de datos, Descripción, Manual

SN8P2711A
5+1-ch 12-bit SAR ADC 8-Bit Micro-Controller
SN8P2711A
USER’S MANUAL
Version 1.6
SN8P2711A
SONiX 8-Bit Micro-Controller
SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Page 1
Version 1.6

1 page




SN8P2711A pdf
SN8P2711A
5+1-ch 12-bit SAR ADC 8-Bit Micro-Controller
8.2.5 TC0C COUNTING REGISTER .............................................................................................. 74
8.2.6 TC0R AUTO-LOAD REGISTER............................................................................................ 75
8.2.7 TC0 EVENT COUNTER FUNCTION .................................................................................... 76
8.2.8 TC0 CLOCK FREQUENCY OUTPUT (BUZZER)................................................................ 76
8.2.9 PULSE WIDTH MODULATION (PWM) .............................................................................. 77
8.2.10 TC0 TIMER OPERATION EXPLAME .................................................................................. 79
8.3 TIMER/COUNTER 1 (TC1) ............................................................................................................ 81
8.3.1 OVERVIEW............................................................................................................................. 81
8.3.2 TC1 TIMER OPERATION ...................................................................................................... 82
8.3.3 TC1M MODE REGISTER....................................................................................................... 83
8.3.4 TC1X8 FLAG........................................................................................................................... 84
8.3.5 TC1C COUNTING REGISTER .............................................................................................. 84
8.3.6 TC1R AUTO-LOAD REGISTER............................................................................................ 85
8.3.7 TC1 EVENT COUNTER FUNCTION .................................................................................... 86
8.3.8 TC1 CLOCK FREQUENCY OUTPUT (BUZZER)................................................................ 86
8.3.9 PULSE WIDTH MODULATION (PWM) .............................................................................. 87
8.3.10 TC1 TIMER OPERATION EXPLAME .................................................................................. 89
99 5+1 CHANNEL ANALOG TO DIGITAL CONVERTER................................................................. 91
9.1 OVERVIEW..................................................................................................................................... 91
9.2 ADC MODE REGISTER ................................................................................................................. 92
9.3 ADC DATA BUFFER REGISTERS................................................................................................ 93
9.4 ADC REFERENCE VOLTAGE REGISTER................................................................................... 94
9.5 ADC OPERATION DESCRIPTION AND NOTIC ......................................................................... 94
9.5.1 ADC SIGNAL FORMAT ........................................................................................................ 94
9.5.2 ADC CONVERTING TIME .................................................................................................... 95
9.5.3 ADC PIN CONFIGURATION ................................................................................................ 96
9.6 ADC OPERATION EXAMLPE....................................................................................................... 97
9.7 ADC APPLICATION CIRCUIT ........................................................................................................... 99
1100 INSTRUCTION TABLE ................................................................................................................. 100
1111 ELECTRICAL CHARACTERISTIC ............................................................................................ 101
11.1 ABSOLUTE MAXIMUM RATING .............................................................................................. 101
11.2 ELECTRICAL CHARACTERISTIC............................................................................................. 101
11.3 CHARACTERISTIC GRAPHS ..................................................................................................... 103
1122 DEVELOPMENT TOOL ................................................................................................................ 104
12.1 SN8P2711 EV-KIT .......................................................................................................................... 104
12.2 ICE AND EV-KIT APPLICATION NOTIC .................................................................................... 107
1133 OTP PROGRAMMING PIN........................................................................................................... 108
13.1 WRITER TRANSITION BOARD SOCKET PIN ASSIGNMENT ............................................... 108
13.2 PROGRAMMING PIN MAPPING:............................................................................................... 109
1144 MARKING DEFINITION............................................................................................................... 110
14.1 INTRODUCTION .......................................................................................................................... 110
14.2 MARKING INDETIFICATION SYSTEM.................................................................................... 110
14.3 MARKING EXAMPLE ................................................................................................................. 110
14.4 DATECODE SYSTEM .................................................................................................................. 111
1155 PACKAGE INFORMATION ......................................................................................................... 112
15.1 P-DIP 14 PIN .................................................................................................................................. 112
15.2 SOP 14 PIN..................................................................................................................................... 113
15.3 SSOP 16 PIN................................................................................................................................... 114
15.4 MSOP 10 PIN ................................................................................................................................. 115
SONiX TECHNOLOGY CO., LTD
Page 5
Version 1.6

5 Page





SN8P2711A arduino
SN8P2711A
5+1-ch 12-bit SAR ADC 8-Bit Micro-Controller
2 CENTRAL PROCESSOR UNIT (CPU)
2.1 PROGRAM MEMORY (ROM)
1K words ROM
0000H
0001H
.
.
0007H
0008H
0009H
.
.
000FH
0010H
0011H
.
.
.
.
.
03FCH
03FDH
03FEH
03FFH
ROM
Reset vector
User reset vector
Jump to user start address
General purpose area
Interrupt vector
User interrupt vector
User program
General purpose area
Reserved
End of user program
The ROM includes Reset vector, Interrupt vector, General purpose area and Reserved area. The Reset vector is
program beginning address. The Interrupt vector is the head of interrupt service routine when any interrupt occurring.
The General purpose area is main program area including main loop, sub-routines and data table.
SONiX TECHNOLOGY CO., LTD
Page 11
Version 1.6

11 Page







PáginasTotal 70 Páginas
PDF Descargar[ Datasheet SN8P2711A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SN8P27118-Bit Micro ControllerSonix
Sonix
SN8P2711A8-Bit Micro-ControllerSonix
Sonix
SN8P2711B8-Bit Micro-ControllerSonix
Sonix

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar