|
ON Semiconductor |
NE5534, SA5534, SE5534,
NE5534A, SA5534A,
SE5534A
Single Low Noise
Operational Amplifier
The NE/SA/SE5534/5534A are single high-performance low noise
operational amplifiers. Compared to other operational amplifiers,
such as TL083, they show better noise performance, improved output
drive capability, and considerably higher small-signal and power
bandwidths.
This makes the devices especially suitable for application in high
quality and professional audio equipment, in instrumentation and
control circuits and telephone channel amplifiers. The op amps are
internally compensated for gain equal to, or higher than, three. The
frequency response can be optimized with an external compensation
capacitor for various applications (unity gain amplifier, capacitive
load, slew rate, low overshoot, etc.).
Features
• Small-Signal Bandwidth: 10 MHz
• Output Drive Capability: 600 W, 10 VRMS at VS = "18 V
• Input Noise Voltage: 4 nVń ǸHz
• DC Voltage Gain: 100000
• AC Voltage Gain: 6000 at 10 kHz
• Power Bandwidth: 200 kHz
• Slew Rate: 13 V/ms
• Large Supply Voltage Range: "3.0 to "20 V
• Pb−Free Packages are Available
Applications
• Audio Equipment
• Instrumentation and Control Circuits
• Telephone Channel Amplifiers
• Medical Equipment
http://onsemi.com
8
1
SOIC−8
D SUFFIX
CASE 751
8
1
PDIP−8
N SUFFIX
CASE 626
PIN CONNECTIONS
D, N Packages
BALANCE 1
INVERTING INPUT 2
NON-INVERTING 3
8
BALANCE/
COMPENSATION
7 V+
6 OUTPUT
V− 4
5 COMPENSATION
Top View
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 8 of this data sheet.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
© Semiconductor Components Industries, LLC, 2012
July, 2012 − Rev. 3
1
Publication Order Number:
NE5534/D
NE5534, SA5534, SE5534, NE5534A, SA5534A, SE5534A
1 85
7
2
3
6
Figure 1. Equivalent Schematic
4
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Supply Voltage
Input Voltage
Differential Input Voltage (Note 1)
Operating Temperature Range
NE
SA
SE
VS
VIN
VDIFF
Tamb
"22
"V Supply
"0.5
0 to +70
−40 to +85
−55 to +125
V
V
V
°C
Storage Temperature Range
Junction Temperature
Power Dissipation at 25°C
N Package
D Package
Tstg
Tj
PD
−65 to +150
150
1150
750
°C
°C
mW
Thermal Resistance, Junction−to−Ambient
N Package
D Package
RqJA
°C/W
130
158
Output Short-Circuit Duration (Note 2)
−
Indefinite
−
Lead Soldering Temperature (10 sec max)
Tsld 230 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Diodes protect the inputs against overvoltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input
voltage exceeds 0.6 V. Maximum current should be limited to "10 mA.
2. Output may be shorted to ground at VS = "15 V, Tamb = 25°C. Temperature and/or supply voltages must be limited to ensure dissipation rating
is not exceeded.
http://onsemi.com
2
|