|
|
Datasheet TEW5314 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | TEW5314 | CEPT/T1 Output Transformer
CEPT/T1
TEW5314 is designed and approved to be used as a Receive transformer in T1/CEPT applications with the following Crystal devices: CS61535A, CS61574, CS61574A, CS61575 and CS6158A. Also as a Transmit Transformer for: CS61574, CS61534and CS61535 Longitudinal Bal.: Exceeds t |  Filtran | transformer |
TEW Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | TEW4087 | LAN Matching Transformer
LAN
SCOPE The TEW4087 transformer was designed to provide matching between a coax cable and a twisted pair.
Matching Transformer
TEW4087
It is based on the Ethernet data link protocol which uses baseband signaling at 10Mbps.
MECHANICAL
0.40
2
0.40
ALL DIMENSIONS ARE IN INC Filtran transformer | | |
| 2 | TEW4229 | U-BUS/DNIC Input/Ouput Transformer
ISDN
U-BUS/DNIC Input/Ouput Transformer
TEW 4229
TEW 4229 is a DNIC interface Transformer approved by Mitel for use with their MT8972 and MT8971B/72B devices.
Applications: • • • Digital subscriber lines. High speed data transmission over twisted wire. Digital PABX lin Filtran transformer | | |
| 3 | TEW4532 | Audio Matching Transformer
Audio
TEP4532 is a 1 : 1 line matching transformer with the following features. • • • • Low profile. Small volume. Conforming to FCC part 68 and Canadian CS 03. Split secondary windings to enable center tapped current feed.
Matching Transformer
TEP4532
Applications: I Filtran transformer | | |
| 4 | TEW4596 | CEPT /T1 Input/Output Transformer
CEPT /T1
TEW4596 T1/CEPT
Input/Output Transformer
In/Output Transformer Through Hole
TEW 4596
Standard .................................................... 2-14
TEW 4596 is designed to be used either as a transmit or a receive transformer in the ISDN primary rate access netw Filtran transformer | | |
| 5 | TEW4610 | ISDN S-BUS Input/Output Transformer
ISDN S-BUS
The 4 wire interface between Subscriber Terminals and The Network Temination has been standardised by CCITT recommendation I.430. It uses a passive bus which provides separate receive and transmit loops operating at 192 Kbits/s.
Input/Output Transformer
TEW4610
The Filtran transformer | | |
| 6 | TEW4840 | ISDN U-BUS Input/Output Transformer
ISDN
U-BUS Input/Output Transformer
TEW4840
TEW4840 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network. TEW4840 meets the electrical specifications of ANSI TI.6011988 and is approved f Filtran transformer | | |
| 7 | TEW4855 | ISDN U-BUS Input/Output Transformer
ISDN
U-BUS Input/Output Transformer
TEW4855
TEW4855 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network. TEW4855 meets the electrical specifications of ANSI TI.6011988 and is approved f Filtran transformer | |
| Esta página es del resultado de búsqueda del TEW5314. Si pulsa el resultado de búsqueda de TEW5314 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |