DataSheet.es    



Datasheet PLL103-02 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
1 PLL103-02   DDR SDRAM Buffer

PLL103-02 DDR SDRAM Buffer for Desktop PCs with 4 DDR DIMMS FEATURES • Generates 24 output buffers from one input. • Supports up to four DDR DIMMS. • Supports 266MHz DDR SDRAM. • One additional output for feedback. • Less than 5ns delay. • Skew between any outputs is less than 100 ps. �
PhaseLink Corporation
PhaseLink Corporation
datasheet PLL103-02 pdf

PLL103 Datasheet ( Hoja de datos ) - resultados coincidentes

Número de pieza Descripción Fabricantes PDF
PLL103-04

1-to-4 Clock Distribution Buffer

Preliminary PLL103-04 1-to-4 Clock Distribution Buffer FEATURES 4 outputs identical to FIN. Low skew (< 250 ps between outputs). Input / Output frequency range 0 – 160 MHz 25mA drive capability at TTL levels. 70mA drive capability at CMOS levels. Output enable mode available
PhaseLink Corporation
PhaseLink Corporation
datasheet pdf - PhaseLink Corporation
PLL103-53

DDR SDRAM Buffer

Preliminary PLL103-53 DDR SDRAM Buffer with 5 DDR or 3 SDR/3 DDR DIMMS FEATURES Generates 30-output buffers from one input. Supports up to 4 DDR DIMMS or 3 SDR DIMMS and 2 DDR DIMMS. • Supports 266MHz DDR SDRAM. • One additional output for feedback. • Less than 5ns delay.
PhaseLink Corporation
PhaseLink Corporation
datasheet pdf - PhaseLink Corporation
PLL103-11

Low Skew Buffers

PLL103-11 Low Skew Buffers FEATURES Generates 13 copies of High-speed clock inputs. Supports up to three SDRAM DIMMS synchronous clocks. • Supports 2-wire I2C serial bus interface with readback. • 50% duty cycle with low jitter. • Less than 5ns delay. �
PhaseLink Corporation
PhaseLink Corporation
datasheet pdf - PhaseLink Corporation


Esta página es del resultado de búsqueda del PLL103-02. Si pulsa el resultado de búsqueda de PLL103-02 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap